SMART 5 BOOT BLOCK MEMORY FAMILY
5.0 ELECTRICAL SPECIFICATIONS
E
* WARNING: Stressing the device beyond the "Absolute
Maximum Ratings" may cause permanent damage. These
are stress ratings only. Operation beyond the "Operating
Conditions" is not recommended and extended exposure
beyond the "Operating Conditions" may effect device
reliability.
NOTICE: This document contains information on products in
the sampling and initial production phases of development.
The specifications are subject to change without notice.
Verify with your local Intel Sales office that you have the
latest datasheet before finalizing a design.
5.1
Absolute Maximum Ratings*
Commercial Operating Temperature
During Read/Erase/Program...... 0 °C to +70 °C
Temperature Under Bias ....... –10 °C to +80 °C
Extended Operating Temperature
During Read/Erase/Program.. –40 °C to +85 °C
Temperature Under Bias ....... –40 °C to +85 °C
Storage Temperature................. –65 °C to +125 °C
Voltage on Any Pin
1. Operating temperature is for commercial product
defined by this specification.
2. Minimum DC voltage is –0.5 V on input/output pins.
During transitions, this level may undershoot to–2.0 V
for periods
<20 ns. Maximum DC voltage on input/output pins is
(except VCC, VPP, A9 and RP#)
with Respect to GND........... –2.0 V to +7.0 V(2)
V
V
CC + 0.5 V which, during transitions, may overshoot to
CC + 2.0 V for periods <20 ns.
Voltage on Pin RP# or Pin A9
3. Maximum DC voltage on VPP may overshoot to +14.0 V
for periods <20 ns. Maximum DC voltage on RP# or A9
may overshoot to 13.5 V for periods <20 ns.
with Respect to GND....... –2.0 V to +13.5 V(2,3)
VPP Program Voltage with Respect
to GND during Block Erase
4. Output shorted for no more than one second.No more
than one output shorted at a time.
and Word/Byte Program .. –2.0 V to +14.0 V(2,3)
VCC Supply Voltage
with Respect to GND........... –2.0 V to +7.0 V(2)
Output Short Circuit Current....................100 mA (4)
5.2
Operating Conditions
Symbol
TA
Parameter
Notes
Min
0
Max
+70
Units
°C
Commercial Operating Temperature
Extended Operating Temperature
5 V VCC Supply Voltage (10%)
5 V VCC Supply Voltage (5%)
5 V VPP Supply Voltage (10%)
12 V VCC Supply Voltage (5%)
-40
+85
°C
VCC
1
2
1
1
4.50
4.75
4.50
11.4
5.50
5.25
5.50
12.6
Volts
Volts
Volts
Volts
VPP
NOTES:
1. 10% VCC specifications apply to the standard test configuration (Figures12 and 13).
2. 5% VCC specifications apply to the high-speed test configuration (Figures11 and 13).
26
ADVANCE INFORMATION
INTEL [ INTEL ]
