欢迎访问ic37.com |
会员登录 免费注册
发布采购

82915GV 参数 Datasheet PDF下载

82915GV图片预览
型号: 82915GV
PDF下载: 下载PDF文件 查看货源
内容描述: Express芯片组 [Express Chipset]
分类和应用:
文件页数/大小: 426 页 / 3241 K
品牌: INTEL [ INTEL ]
 浏览型号82915GV的Datasheet PDF文件第59页浏览型号82915GV的Datasheet PDF文件第60页浏览型号82915GV的Datasheet PDF文件第61页浏览型号82915GV的Datasheet PDF文件第62页浏览型号82915GV的Datasheet PDF文件第64页浏览型号82915GV的Datasheet PDF文件第65页浏览型号82915GV的Datasheet PDF文件第66页浏览型号82915GV的Datasheet PDF文件第67页  
Register Description  
R
3.4  
I/O Mapped Registers  
The (G)MCH contains two registers that reside in the processor I/O address space the  
Configuration Address (CONFIG_ADDRESS) Register and the Configuration Data  
(CONFIG_DATA) Register. The Configuration Address Register enables/disables the  
configuration space and determines what portion of configuration space is visible through the  
Configuration Data window.  
3.4.1  
CONFIG_ADDRESS—Configuration Address Register  
I/O Address:  
Default Value:  
Access:  
0CF8h Accessed as a DWord  
00000000h  
R/W  
Size:  
32 bits  
CONFIG_ADDRESS is a 32-bit register that can be accessed only as a DW. A Byte or Word  
reference will "pass through" the Configuration Address Register and DMI onto the Primary PCI  
bus as an I/O cycle. The CONFIG_ADDRESS register contains the Bus Number, Device  
Number, Function Number, and Register Number for which a subsequent configuration access is  
intended.  
Bit  
Access  
&
Default  
Description  
31  
R/W  
0b  
Configuration Enable (CFGE):  
1 = Enable  
0 = Disable  
30:24  
23:16  
Reserved  
R/W  
00h  
Bus Number: If the Bus Number is programmed to 00h the target of the  
Configuration Cycle is a PCI Bus #0 agent. If this is the case and the (G)MCH is  
not the target (i.e., the device number is 3 and not equal to 7), then a DMI Type  
0 Configuration Cycle is generated.  
If the Bus Number is non-zero, and does not fall within the ranges enumerated by  
device 1’s Secondary Bus Number or Subordinate Bus Number Register, then a  
DMI Type 1 Configuration Cycle is generated.  
If the Bus Number is non-zero and matches the value programmed into the  
Secondary Bus Number Register of device 1, a Type 0 PCI configuration cycle will  
be generated on PCI Express Graphics.  
If the Bus Number is non-zero, greater than the value in the Secondary Bus  
Number register of device 1 and less than or equal to the value programmed into  
the Subordinate Bus Number Register of device 1 a Type 1 PCI configuration  
cycle will be generated on PCI Express Graphics.  
This field is mapped to byte 8 [7:0] of the request header format during PCI  
Express Configuration cycles and A[23:16] during the DMI Type 1 configuration  
cycles.  
Datasheet  
63  
 复制成功!