Host-PCI Express* Bridge Registers (D1:F0)
(Intel® 82915G/82915P/82915PL Only)
R
8.1.25
SS_CAPID—Subsystem ID and Vendor ID Capabilities
(D1:F0)
PCI Device:
Address Offset:
Default Value:
Access:
1
88h
0000800Dh
RO
Size:
32 bits
This capability is used to uniquely identify the subsystem where the PCI device resides. Because
this device is an integrated part of the system and not an add-in device, it is anticipated that this
capability will never be used. However, it is necessary because Microsoft will test for its
presence.
Bit
Access &
Default
Description
31:16
15:8
Reserved
RO
Pointer to Next Capability: This field contains a pointer to the next item in the
80h
capabilities list which is the PCI Power Management capability.
7:0
RO
Capability ID: A value of 0Dh identifies this linked list item (capability structure)
0D h
as being for SSID/SSVID registers in a PCI-to-PCI Bridge.
8.1.26
SS—Subsystem ID and Subsystem Vendor ID (D1:F0)
PCI Device:
Address Offset:
Default Value:
Access:
1
8Ch
00008086h
RO
Size:
32 bits
System BIOS can be used as the mechanism for loading the SSID/SVID values. These values
must be preserved through power management transitions and hardware reset.
Bit
Access &
Default
Description
31:16
15:0
R/WO
0000h
Subsystem ID (SSID): This field identifies the particular subsystem and is
assigned by the vendor.
R/WO
8086h
Subsystem Vendor ID (SSVID): This field identifies the manufacturer of the
subsystem and is the same as the vendor ID that is assigned by the PCI Special
Interest Group.
146
Datasheet
INTEL [ INTEL ]
