欢迎访问ic37.com |
会员登录 免费注册
发布采购

317607-001 参数 Datasheet PDF下载

317607-001图片预览
型号: 317607-001
PDF下载: 下载PDF文件 查看货源
内容描述: Express芯片组 [Express Chipset]
分类和应用:
文件页数/大小: 351 页 / 2481 K
品牌: INTEL [ INTEL ]
 浏览型号317607-001的Datasheet PDF文件第224页浏览型号317607-001的Datasheet PDF文件第225页浏览型号317607-001的Datasheet PDF文件第226页浏览型号317607-001的Datasheet PDF文件第227页浏览型号317607-001的Datasheet PDF文件第229页浏览型号317607-001的Datasheet PDF文件第230页浏览型号317607-001的Datasheet PDF文件第231页浏览型号317607-001的Datasheet PDF文件第232页  
Integrated Graphics Device Registers (D2:F0,F1)  
8.1.4  
PCISTS2—PCI Status  
B/D/F/Type:  
Address Offset:  
Default Value:  
Access:  
0/2/0/PCI  
06–07h  
0090h  
RO, RWC  
16 bits  
Size:  
PCISTS is a 16-bit status register that reports the occurrence of a PCI compliant  
master abort and PCI compliant target abort. PCISTS also indicates the DEVSEL#  
timing that has been set by the IGD.  
Bit  
15  
Access &  
Default  
Description  
Detected Parity Error (DPE): Since the IGD does not detect parity,  
this bit is always hardwired to 0.  
RO  
0b  
14  
Signaled System Error (SSE): The IGD never asserts SERR#,  
therefore this bit is hardwired to 0.  
RO  
0b  
13  
Received Master Abort Status (RMAS): The IGD never gets a  
Master Abort, therefore this bit is hardwired to 0.  
RO  
0b  
12  
Received Target Abort Status (RTAS): The IGD never gets a  
Target Abort, therefore this bit is hardwired to 0.  
RO  
0b  
11  
Signaled Target Abort Status (STAS): Hardwired to 0. The IGD  
does not use target abort semantics.  
RO  
0b  
10:9  
8
DEVSEL Timing (DEVT): N/A. These bits are hardwired to "00".  
RO  
00b  
Master Data Parity Error Detected (DPD): Since Parity Error  
Response is hardwired to disabled (and the IGD does not do any  
parity detection), this bit is hardwired to 0.  
RO  
0b  
7
6
5
4
Fast Back-to-Back (FB2B): Hardwired to 1. The IGD accepts fast  
back-to-back when the transactions are not to the same agent.  
RO  
1b  
User Defined Format (UDF): Hardwired to 0.  
RO  
0b  
66 MHz PCI Capable (66C): N/A - Hardwired to 0.  
RO  
0b  
Capability List (CLIST): This bit is set to 1 to indicate that the  
register at 34h provides an offset into the function's PCI  
Configuration Space containing a pointer to the location of the first  
item in the list.  
RO  
1b  
3
Interrupt Status (INTSTS): This bit reflects the state of the  
interrupt in the device. Only when the Interrupt Disable bit in the  
command register is a 0 and this Interrupt Status bit is a 1, will the  
devices INTx# signal be asserted.  
RWC  
0b  
Setting the Interrupt Disable bit to a 1 has no effect on the state of  
this bit. This bit is set by Hardware, and Software must write a '1' to  
clear it.  
2:0  
RO  
Reserved  
000b  
228  
Datasheet