A10-DATASHEET
2015.12.31
103
Document Revision History
Date
Version
Changes
June 2015
2015.06.12
•
Changed the specifications for the backplane maximum data rate condition in the "Transmitter and Receiver
Data Rate Performance" table for Arria 10 GX/SX devices.
•
•
Changed the specifications for transmitter REFCLKphase noise in the "Reference Clock Specifications" table.
Added note in the following tables:
•
•
•
Absolute Maximum Ratings for Arria 10 Devices: VCCPGM
Maximum Allowed Overshoot During Transitions for Arria 10 Devices: LVDS I/O
Recommended Operating Conditions for Arria 10 Devices: VI
•
•
Added HPS Specifications.
Updated recommended EPCQ-L serial configuration devices in the Uncompressed .rbf Sizes table.
May 2015
May 2015
2015.05.08 Made the following changes:
•
•
•
Changed the specifications for the VICM (AC coupled) parameter in the "Reference Clock Specifications"
table.
Changed the maximum frequency in the "CMU PLL Performance" table in the Transceiver Performance for
GT Devices section.
Added a footnote to the transceiver speed grade 5 column in the "Transmitter and Receiver Data Rate
Performance" table.
2015.05.04
•
•
Updated the Maximum Allowed Overshoot During Transitions for Arria 10 Devices table.
Added a note to tramp in the Recommended Operating Conditions for Arria 10 Devices table. Note: tramp is
the ramp time of each individual power supply, not the ramp time of all combined power supplies.
Changed the minimum, typical, and maximum values for the transmitter and receiver power supply in the
"Transceiver Power Supply Operating Conditions for Arria 10 GT Devices" table.
•
•
Added –1 speed grade in the condition column for VCCL_HPS at 0.95 V in HPS Power Supply Operating
Conditions for Arria 10 SX Devices table.
Arria 10 Device Datasheet
Send Feedback
Altera Corporation