A10-DATASHEET
2015.12.31
102
Document Revision History
Date
Version
Changes
•
Updated PS Timing Parameters for Arria 10 Devices table.
•
•
•
•
Updated the maximum value for tSTATUS and tCF2ST1 from 1,506 μs to 3,000 μs
Updated the minimum value for tCF2CK from 1,506 μs to 3,010 μs.
Updated the minimum value for tST2CK from 2 μs to 10 μs.
Updated the maximum value for tCD2UM from 437 μs to 830 μs.
•
•
Added description about .rbf and .rpd files in the Configuration Files section. Changed the table title from
"Uncompressed Uncompressed .rbf Sizes Sizes for Arria 10 Devices" to "Configuration Bit Stream Sizes for
Arria 10 Devices".
Updated the note to Active Serial in Minimum Configuration Time Estimation for Arria 10 Devices table.
Note: The minimum configuration time is calculated based on DCLK frequency of 100 MHz. Only external
CLKUSRmay guarantee the frequency accuracy of 100 MHz. If you use internal oscillator of 100 MHz, you
may not get the actual frequency of 100 MHz. For the DCLK frequency using internal oscillator, refer to the
DCLK Frequency Specification in the AS Configuration Scheme table.
Changed instances of Quartus II to Quartus Prime.
Changed voltages and conditions in the "Transceiver Power Supply Operating Conditions for Arria 10 GX/
SX Devices" table.
•
•
•
•
Changed maximum data rate conditions in the "Transmitter and Receiver Data Rate Performance" table.
Changed conditions in the "Transmitter and Receiver Data Rate Performance" table in the Transceiver
Performance for Arria 10 GT Devices section.
•
•
•
•
•
Changed conditions in the "Reference Clock Specifications" table.
Changed the clock networks in the "Transceiver Clock Network Maximum Data Rate Specifications" table.
Changed conditions in the "Receiver Specifications" table.
Changed conditions in the "Transmitter Specifications" table.
Changed the minimum frequeny in the "ATX PLL Performance," "Fractional PLL Performance," and "CMU
PLL Performance" tables in the Transceiver Performance for Arria 10 GX/SX Devices section.
Changed the minimum frequeny in the "ATX PLL Performance," "Fractional PLL Performance," and "CMU
PLL Performance" tables in the Transceiver Performance for Arria 10 GT Devices section.
Added a parameter to the "Reference Clock Specifications" table.
•
•
•
Added footnote to the "Transmitter Specifications" table.
Arria 10 Device Datasheet
Send Feedback
Altera Corporation