XC2287 / XC2286 / XC2285
XC2000 Family Derivatives
Preliminary
Summary of Features
– On-Chip MultiCAN Interface (Rev. 2.0B active) with 128 Message Objects
(Full CAN/Basic CAN) on up to 5 CAN Nodes and Gateway Functionality
– On-Chip Real Time Clock
•
Up to 12 Mbytes External Address Space for Code and Data
– Programmable External Bus Characteristics for Different Address Ranges
– Multiplexed or Demultiplexed External Address/Data Buses
– Selectable Address Bus Width
– 16-Bit or 8-Bit Data Bus Width
– Five Programmable Chip-Select Signals
– Hold- and Hold-Acknowledge Bus Arbitration Support
Single Power Supply from 3.0 V to 5.5 V
Power Reduction Modes with Flexible Power Management
Programmable Watchdog Timer and Oscillator Watchdog
Up to 118 General Purpose I/O Lines
•
•
•
•
•
•
On-Chip Bootstrap Loader
Supported by a Large Range of Development Tools like C-Compilers, Macro-
Assembler Packages, Emulators, Evaluation Boards, HLL-Debuggers, Simulators,
Logic Analyzer Disassemblers, Programming Boards
On-Chip Debug Support via JTAG Interface
•
•
144-Pin Green LQFP Package, 0.5 mm (19.7 mil) pitch
Ordering Information
The ordering code for Infineon microcontrollers provides an exact reference to the
required product. This ordering code identifies:
•
•
the derivative itself, i.e. its function set, the temperature range, and the supply voltage
the package and the type of delivery.
For the available ordering codes for the XC228x please refer to your responsible sales
representative or your local distributor.
This document describes several derivatives of the XC228x group. Table 1 enumerates
these derivatives and summarizes the differences. As this document refers to all of these
derivatives, some descriptions may not apply to a specific product.
For simplicity all versions are referred to by the term XC228x throughout this document.
Data Sheet
5
V0.91, 2007-02
Draft Version
INFINEON [ Infineon ]
