OPTIREG™ SBC TLE9274QXV33
Revision history
Revision
Date
2017-10-22 Preliminary Datasheet:
Updated the Figure 3 on SBC Normal Mode.
Changes
1.2
Update the description of Figure 21.
Removed the “optional” on Figure 21.
Added P_8.3.58 (according to ISO11898-2:2016).
Added P_4.1.28 (according to ISO11898-2:2016).
Correct description Chapter 13.5.1.
Correct description Chapter 13.5.2 and updated Figure 45.
Corrected the bit type of SMPS_STAT register.
Corrected description on Chapter 13.8.3 and Figure 3.
Updated P_8.3.7 test conditions.
Updated P_8.3.6 test conditions.
Updated P_8.3.5 test conditions.
Updated P_8.3.16 test conditions.
Updated the description about LIN rearming in Chapter 9.2.4.
Updated the description about CAN rearming in Chapter 8.2.4.
Updated SYS_STAT_CTRL register note description.
Updated Chapter 9.2.6 description.
Update Chapter 8.2.7 description.
Added chapter outcome pre and system tests verification.
Added P_8.3.50, P_8.3.51, P_8.3.52 and P_8.3.53.
Change description on WK_LVL_STAT and Table 6 regarding the Fail-Safe
Output behavior in case of watchdog trigger issue.
Added the VCC2,UV Blanking time as internal parameter.
Modified description Chapter 8.2.6.
Add additional Note in SUP_STAT, BUS_STAT_1 and BUS_STAT_2 regarding
the register content after one software reset.
Update LIN wake-up description.
Updated description Chapter 13.8.3.
Updated parameter P_13.9.34.
Updated FSI in Stop Mode and Restart Mode description.
Updated max limit of P_12.3.11.
Updated description DEV_STAT register Notes.
Update test condition P_8.3.26.
1.1
2016-10-17 Target Datasheet updated:
Added CAN FD timing parameters up to 5Mbps.
Corrected the naming of Figure 22 (tLOOP,f and tLOOP,r).
Updated the title of Figure 41 and Figure 42.
Improve the description of LIN wake-up pattern detection (Chapter 9.2.4).
Updated footnote 5) on Chapter 8.3 according to ISO11898-2.
Added description 11B on WD_FAIL: reserved (never achieved).
Updated description Chapter 13.2.3.
1.0
2015-10-08 First Revision of Datasheet.
Datasheet
129
Rev.2.0
2022-05-06
INFINEON [ Infineon ]
