PEB 2091
PEF 2091
Register Description
5.2.7
CIRU-Register
Read
Address C
H
The Read C/I-code from U Register (CIRU) reads the C/I-code from the transceiver core.
Reset value: 03H
7
6
5
4
3
2
1
0
C/I
C/I
C/I
C/I
7., 6. bits Set to "0".
5.-2. bits Contain the C/I-indication coming from the transceiver core.
1., 0. bits Set to "1".
5.2.8
CIWU-Register
Write
Address C
H
The Write C/I-code to U Register (CIWU) writes the C/I-code to the transceiver core.
Reset value: C3H
7
6
1
5
4
3
2
1
1
0
1
SPU
C/I
C/I
C/I
C/I
SPU
Software Power-Up Bit
Valid only in the NT mode.
1=
Data on DIN will be transparently transmitted to the transceiver core
(default)
0=
Data on DIN will be ignored and binary "0" will be continuously
transmitted to the transceiver core if the NT mode is selected (pin
LT="0")
6. bits
Set to "1"
5.-2. bits
Contain the C/I-code going to the transceiver core
1., 0. bits Set to "1"
Semiconductor Group
217
Data Sheet 01.99
INFINEON [ Infineon ]
