Register Description
Note: In non-terminal mode (SPCR:SPM = 1) IC1, IC2 correspond to B1, B2 channels of
the IOM channel as programmed to (ADF1:CSEL 2–0) +1.
ODS
Output Driver Selection
Tristate drivers (1) or open drain drivers (0) are used for the IOM interface.
4.3.17 MONITOR Status Register
MOSR
Read
Address 3A
H
Value after reset: 00
H
7
0
MDR1 MER1 MDA1 MAB1 MDR0 MER0 MDA0 MAB0
MDR1 MONITOR Channel 1 Data Received
MER1 MONITOR Channel 1 End of Reception
MDA1 MONITOR Channel 1 Data Acknowledged
The remote end has acknowledged the MONITOR byte being transmitted.
MAB1 MONITOR Channel 1 Data Abort
MDR0 MONITOR Channel 0 Data Received
MER0 MONITOR Channel 0 End of Reception
MDA0 MONITOR Channel 0 Data Acknowledged
The remote end has acknowledged the MONITOR byte being transmitted.
MAB0 MONITOR Channel 0 Data Abort
4.3.18 MONITOR Control Register
MOCR
Write
Address 3A
H
Value after reset: 00
H
7
0
MRE1 MRC1 MXE1 MXC1 MRE0 MRC0 MXE0 MXC0
MRE1,0 MONITOR Receive Interrupt Enable (IOM channel 1,0)
MONITOR interrupt status MDR1/MDR0, MER1/0 generation is enabled (1) or
masked (0).
Semiconductor Group
240
INFINEON [ Infineon ]
