iC-MN 25-BIT NONIUS ENCODER
WITH 3-CH. SAMPLING 13-BIT Sin/D INTERPOLATION
Rev D1, Page 40/59
ELC
Code
0
Addr. 0x3F; bit 6
Function (only with BiSS C protocol)
Safety Application Settings
It is possible to transmit a life counter value in the sen-
sor data for safety applications. When the life counter
is activated, a 6-bit counter value is transmitted in the
sensor data which is incremented with each new sen-
sor data readout. The life counter has a range of 1 to
64.
Life counter not active
Life counter enabled
1
Table 66: Life counter
Figure 18: Example of line signals for BiSS C protocol with life counter
the two slaves. Should the busy register not be suffi-
Busy Register
iC-MN has a 16-bit busy register. If, for example, two cient, i.e. should iC-MN need longer to convert data
identically configured iC-MNs are connected up to the than the subsequent slave, iC-MN generates the start
BiSS master as slaves in a chain, with the help of the bit and marks the data it has output as faulty. This en-
busy register an internal clock jitter can be avoided sures that the data of the ensuing slave is not lost.
which could lead to different data conversion times for
ICHAUS [ IC-HAUS GMBH ]
