Discontinued (8/99 - last order; 12/99 - last ship)
IBM0364804 IBM0364164
IBM0364404 IBM03644B4
64Mb Synchronous DRAM - Die Revision B
Precharge Termination
The Precharge Command may be used to terminate either a burst read or burst write operation. When the
Precharge command is issued, the burst operation is terminated and bank precharge begins. For burst read
operations, valid data will continue to appear on the data bus as a function of CAS Latency.
Burst Read Interrupted by Precharge
(Burst Length = 8, CAS Latency = 2, 3)
T0
T1
T2
T3
T4
T5
T6
T7
T8
CLK
READ Ax0
NOP
NOP
NOP
NOP
NOP
NOP
NOP
Precharge A
DOUT Ax2
COMMAND
t
RP
*
CAS latency = 2
DOUT Ax0
DOUT Ax1
DOUT Ax0
DOUT Ax3
tCK2, DQs
t
*
RP
*
CAS latency = 3
DOUT Ax1
DOUT Ax2
DOUT Ax3
tCK3, DQs
*
For -360/-260, tCK3 = 10; tRP = 2
Bank A can be reactivated at completion of t
RP
*
©IBM Corporation. All rights reserved.
Use is further subject to the provisions at the end of this document.
19L3264.E35855A
1/28/99
Page 26 of 72