•
•
For 1125 line interlaced systems: re-sync takes place at the end of lines 7 & 568.
For 1125 line progressive systems: re-sync takes place at the end of line 7.
A full list of all major video standards and switching lines is shown in Table 4-4.
NOTE 1: The Flywheel timing will define the line count such that the line numbers
shown in Table 4-4 may not correspond directly to the digital line counts.
NOTE 2: Unless indicated by SMPTE 352M Payload Identifier Packets, the GS1559 will
not distinguish between 50/60 frames PsF and 25/30 frames interlaced for the 1125 line
video systems; 24 PsF will be identified.
Table 4-4: Switch Line Position for Digital Systems
System
Video Format
Sampling
Signal
Standard
Parallel
Interface
Serial
Interface
Switch Line
No.
HD-SDTI
1920x1080 (PsF)
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:2:2
4:4:4:4
4:4:4:4
4:4:4:4
4:4:4:4
4:2:2
4:2:2
4:2:2
274M
274M + 348M
274M + 348M
296M + 348M
BT.656 + 305M
125M + 305M
296M
292M
292M
292M
259M
259M
296M
296M
296M
296M
296M
292M
292M
292M
292M
292M
292M
259M
292M
344M
344M
RP175
292M
259M
292M
7
1920x1080 (2:1)
274M
7, 569
7
1280x720 (1:1)
296M
SDTI
750
720x576/50 (2:1)
BT.656
6, 319
10, 273
7
720x483/59.94 (2:1)
1280x720/60 (1:1)
1280x720/50 (1:1)
1280x720/30 (1:1)
1280x720/25 (1:1)
1280x720/24 (1:1)
1920x1080/30 (PsF)
1920x1080/25 (PsF)
1920x1080/24 (PsF)
1920x1080/60 (2:1)
1920x1080/50 (2:1)
960x483/59.94 (2:1)
960x483/59.94 (2:1)
720x483/59.94 (2:1)
720x483/59.94 (2:1)
720x483/59.94 (2:1)
720x483/59.94 (2:1)
720x483/59.94 (2:1)
720x483/59.94 (2:1)
720x483/59.94 (1:1)
125M
296M
296M
296M
7
296M
296M
7
296M
296M
7
296M
296M
7
1125
274M + RP211
274M + RP211
274M + RP211
274M + RP211
274M + RP211
267M
274M + RP211
274M + RP211
274M + RP211
274M + RP211
274M + RP211
349M
7
7
7
7, 569
7, 569
10, 273
10, 273
10, 273
10, 273
10, 273
10, 273
10, 273
10, 273
10
525
267M
267M
267M
349M
267M
347M
267M
RP174
267M
RP175
125M
349M
125M
125M
293M
349M
GS1559 HD-LINX™ II Multi-Rate Deserializer with
Loop-Through Cable Driver
Data Sheet
35 of 71
30572 - 8
July 2008
GENNUM [ GENNUM CORPORATION ]
