ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 3. Static Electrical Characteristics
Characteristics noted under conditions of 3.0 V ≤ VDD ≤ 5.5 V, 6.0 V ≤ VPWR ≤ 32 V, -40°C ≤ TC ≤ 125°C, and calibrated
timers, unless otherwise noted. Where typical values reflect the parameter’s approx. average value with VPWR = 13 V, TA =
25°C.
Characteristic
Symbol
Min
Typ
Max
Unit
Notes
4. These parameters are guaranteed by design, but not production tested. Fully operational means driver outputs will toggle as expected
with input toggling. SPI is guaranteed to be operational when VPWR > 4.5 V. SPI may not report correctly when VPWR < 4.5 V.
5. Over-voltage thresholds minimum and maximum include hysteresis.
6. Under-voltage thresholds minimum and maximum include hysteresis.
7. Device is functional provided TJ is less than 150°C. Some table parameters may be out of specification.
8. Device in Sleep State, returns from sleep state with power on reset.
9. Output fault detection thresholds with outputs programmed OFF. Output fault detect thresholds are the same for output open and shorts.
33810
Analog Integrated Circuit Device Data
Freescale Semiconductor
7
FREESCALE [ Freescale ]
