XBee®/XBee‐PRO® ZB SMT RF Modules
The round holes in the diagram are for the ZB through-hole design, and the semi-oval pads are for the ZB SMT
design. Pin 1 of the through-hole design is lined up with pin 1 of the ZB SMT design, but the pins are actually
offset by one pad (see Pin Mapping above). By using diagonal traces to connect the appropriate pins, the layout
will work for both modules.
Information on attaching the ZB SMT module is included in Appendix C below.
© 2010 Digi International, Inc.
149