欢迎访问ic37.com |
会员登录 免费注册
发布采购

PCM1796 参数 Datasheet PDF下载

PCM1796图片预览
型号: PCM1796
PDF下载: 下载PDF文件 查看货源
内容描述: 24位192 kHz的采样高级分段音频立体声数字模拟转换器 [24BIT 192 KHZ SAMPLING ADVANCED SEGMENT AUDIO STEREO DIGITAL TO ANALOG CONVERTER]
分类和应用: 转换器
文件页数/大小: 57 页 / 508 K
品牌: BB [ BURR-BROWN CORPORATION ]
 浏览型号PCM1796的Datasheet PDF文件第26页浏览型号PCM1796的Datasheet PDF文件第27页浏览型号PCM1796的Datasheet PDF文件第28页浏览型号PCM1796的Datasheet PDF文件第29页浏览型号PCM1796的Datasheet PDF文件第31页浏览型号PCM1796的Datasheet PDF文件第32页浏览型号PCM1796的Datasheet PDF文件第33页浏览型号PCM1796的Datasheet PDF文件第34页  
ꢀ ꢁꢂ ꢃ ꢄ ꢅ ꢆ  
www.ti.com  
SLES100 − DECEMBER 2003  
SRST: System Reset Control  
This bit is available for write only.  
Default value: 0  
SRST = 0  
SRST = 1  
Normal operation (default)  
System reset operation (generate one reset pulse)  
The SRST bit is used to reset the PCM1796 to the initial system condition.  
DSD: DSD Interface Mode Control  
This bit is available for read and write.  
Default value: 0  
DSD = 0  
DSD = 1  
DSD interface mode disabled (default)  
DSD interface mode enabled  
The DSD bit is used to enable or disable the DSD interface mode.  
DFTH: Digital Filter Bypass (or Through Mode) Control  
This bit is available for read and write.  
Default value: 0  
DFTH = 0  
DFTH = 1  
Digital filter enabled (default)  
Digital filter bypassed for external digital filter  
The DFTH bit is used to enable or disable the external digital filter interface mode.  
MONO: Monaural Mode Selection  
This bit is available for read and write.  
Default value: 0  
MONO = 0  
MONO = 1  
Stereo mode (default)  
Monaural mode  
The MONO function is used to change operation mode from the normal stereo mode to the monaural mode. When  
the monaural mode is selected, both DACs operate in a balanced mode for one channel of audio input data. Channel  
selection is available for L-channel or R-channel data, determined by the CHSL bit as described immediately  
following.  
CHSL: Channel Selection for Monaural Mode  
This bit is available for read and write.  
Default value: 0  
CHSL = 0  
CHSL = 1  
L-channel selected (default)  
R-channel selected  
This bit is available when MONO = 1.  
The CHSL bit selects L-channel or R-channel data to be used in monaural mode.  
30  
 复制成功!