Arizona Microtek, Inc.
AZP63
Low Phase Noise Sine Wave CMOS
to LVPECL Buffer/Translator
DIE SPECIFICATIONS
Die Size 754µ x 354µ
Pad Size 52.1µ Octagonal
Die Coordinates (Center 0,0)
X Coordinate
(µm)
Y Coordinate
Pad Name
(µm)
D
EN_SEL
DIV_SEL
VDD
Q
-273.875
-140.350
-43.625
302.875
170.925
72.550
-106.575
-106.650
-106.650
-20.450
105.725
105.725
106.000
72.325
QN
EN
-175.300
-296.350
GND
Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice.
Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for
any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of
any product or circuit and specifically disclaims any and all liability, including without limitation special,
consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of
others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems
intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc.
product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona
Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold
Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of
personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part.
www.azmicrotek.com
+1-480-962-5881
12
Request a Sample
Mar 2013, Rev 2.2
AZM [ ARIZONA MICROTEK, INC ]
