欢迎访问ic37.com |
会员登录 免费注册
发布采购

ATMEGA2560-16AU-SL383 参数 Datasheet PDF下载

ATMEGA2560-16AU-SL383图片预览
型号: ATMEGA2560-16AU-SL383
PDF下载: 下载PDF文件 查看货源
内容描述: [Microcontroller, 8-Bit, FLASH, AVR RISC CPU, 16MHz, CMOS, PQFP100, 14 X 14 MM, 1 MM HEIGHT, 0.50 MM PITCH, GREEN, PLASTIC, MS-026AED, TQFP-100]
分类和应用: 时钟微控制器
文件页数/大小: 448 页 / 7518 K
品牌: ATMEL [ ATMEL ]
 浏览型号ATMEGA2560-16AU-SL383的Datasheet PDF文件第187页浏览型号ATMEGA2560-16AU-SL383的Datasheet PDF文件第188页浏览型号ATMEGA2560-16AU-SL383的Datasheet PDF文件第189页浏览型号ATMEGA2560-16AU-SL383的Datasheet PDF文件第190页浏览型号ATMEGA2560-16AU-SL383的Datasheet PDF文件第192页浏览型号ATMEGA2560-16AU-SL383的Datasheet PDF文件第193页浏览型号ATMEGA2560-16AU-SL383的Datasheet PDF文件第194页浏览型号ATMEGA2560-16AU-SL383的Datasheet PDF文件第195页  
ATmega640/1280/1281/2560/2561  
20.10.2 TCCR2B – Timer/Counter Control Register B  
Bit  
7
FOC2A  
W
6
FOC2B  
W
5
4
3
WGM22  
R/W  
0
2
CS22  
R/W  
0
1
CS21  
R/W  
0
0
CS20  
R/W  
0
TCCR2B  
(0xB1)  
Read/Write  
Initial Value  
R
0
R
0
0
0
• Bit 7 – FOC2A: Force Output Compare A  
The FOC2A bit is only active when the WGM bits specify a non-PWM mode.  
However, for ensuring compatibility with future devices, this bit must be set to zero when  
TCCR2B is written when operating in PWM mode. When writing a logical one to the FOC2A bit,  
an immediate Compare Match is forced on the Waveform Generation unit. The OC2A output is  
changed according to its COM2A1:0 bits setting. Note that the FOC2A bit is implemented as a  
strobe. Therefore it is the value present in the COM2A1:0 bits that determines the effect of the  
forced compare.  
A FOC2A strobe will not generate any interrupt, nor will it clear the timer in CTC mode using  
OCR2A as TOP.  
The FOC2A bit is always read as zero.  
• Bit 6 – FOC2B: Force Output Compare B  
The FOC2B bit is only active when the WGM bits specify a non-PWM mode.  
However, for ensuring compatibility with future devices, this bit must be set to zero when  
TCCR2B is written when operating in PWM mode. When writing a logical one to the FOC2B bit,  
an immediate Compare Match is forced on the Waveform Generation unit. The OC2B output is  
changed according to its COM2B1:0 bits setting. Note that the FOC2B bit is implemented as a  
strobe. Therefore it is the value present in the COM2B1:0 bits that determines the effect of the  
forced compare.  
A FOC2B strobe will not generate any interrupt, nor will it clear the timer in CTC mode using  
OCR2B as TOP.  
The FOC2B bit is always read as zero.  
• Bits 5:4 – Res: Reserved Bits  
These bits are reserved bits and will always read as zero.  
• Bit 3 – WGM22: Waveform Generation Mode  
See the description in the “TCCR2A –Timer/Counter Control Register A” on page 188.  
• Bit 2:0 – CS22:0: Clock Select  
The three Clock Select bits select the clock source to be used by the Timer/Counter, see Table  
20-9.  
191  
2549L–AVR–08/07  
 复制成功!