9
Analyze power consumption and demand using acquired data
■ Integral power consumption analysis and demand analysis screens
These screens allow you to calculate measurement data and display it in the integral power consumption graph or demand graph.
(Use them to display the maximum demand, average demand, and load ratio values.) Further, you can confirm the power data for a specific interval
using the cursor function.
General power
consumption is
displayed.
Cursor
measurement
Quickly print reports and apply data
■ CSV format conversion function
■ Print function
Convert data displayed in the TIME PLOT or event
waveform screen into CSV format. Converted data can
be used with spreadsheet software on your PC.
Print a hard copy of the event list screen, event data screen, ∆V10 screen,
integral power consumption screen, or demand screen, one at a time.
In the TIME PLOT screen, you can collect all of the screens that are
currently open and print them on a single sheet.
Convenient Feature
Print example: Event waveform screen printed on A4 paper
Specify a range using the A and B cursors, and convert the data
within that range into CSV format.
The interval between the A and B cursors is displayed in red.
A
B
Print example: TIME PLOT screen (U-THD RMS fluctuation) printed on A4 paper
9624-10 PQA-HiVIEW PRO (Advanced functions added to the standard Model 9624)
■ ITIC curve display function
■ EN50160 display functions
Make ITIC (CBEMA) curve analyses (limit curve) based
on the power quality control standards of the U.S.A.
(applicable standard is EN50160:1999)
Effectively evaluate and analyze the quality of power according
to EU standards.
✻ Change the upper or
lower limit of the curve
as desired.
■ Downloading from LAN
Data (BINARY/TEXT/BMP) recorded on a PC card or the internal memory of the 3196 can be downloaded via LAN to a personal
computer. (*This can be done without use of the freeware Down96. Measurement on the 3196 must be halted during download.)
■ Report generation function
Choose from 3 types of report generation settings to take care of all the troublesome reporting operations, and either send the data to a
printer or save as a Rich Text file. (Automatic: Output basic items. Individual setting: Select any item for output. Detailed setting: Specify a time-
series graph in details for output.)
■ Positive phase, negative phase, and zero phase function
Recalculate event data captured by 3P4W circuits, and display each component of the voltage/current of the positive phase, negative
phase, and zero phase.
■ Model 9624-10 can be used only in conjunction with a hardware license key.
Please select either USB or Parallel license key when ordering.
ASM-SENSOR [ ASM GMBH ]
