4
Real-time data display for power supplies
Display waveform, vector, DMM, and harmonic data in real-time
The VIEW screen displays voltage/current waveforms, vector diagrams, DMM values (voltage, current, and
power), and harmonic data. All data can be measured and processed simultaneously, and power conditions
such as distortion factor, K factor, and the unbalance factor for three-phase lines can be monitored using the
various data displays.
Connect the 3196 to a power source to display power line data in real-time
All power line conditions can be monitored from the VIEW screen!
■
Display data in real-time
■ Power management through a rich array of information
-1. Check the distortion of power waveforms using electronic devices and electrical overloads.
-1. Waveform display (voltage/current display, 4-channel voltage
display, 4-channel current display)
-2. Vector display
-3. DMM display (power, voltage, and current displays)
-4. Harmonics (graph and list displays)
-2. Manage the phase of power lines. Check the phase and wiring of the VT (PT) and CT
terminals.
-3. Manage, maintain and check the unbalance factor, peak values, and distortion factor of
power lines.
-4. Assess and develop countermeasures to prevent the occurrence of harmonic power flow.
Check for proper instrument connection using the numerical value or vector display
Connect the 3196 to the power line to be
monitored while viewing the connection
diagram.Upon connection, you can confirm
voltage, current, and power values. Further,
through the vector display, you can verify
proper connection of clamp-on current
View the phases
sensors to the VT (PT) and CT terminals.
Waveform display
DMM display
This displays the voltage and current waveforms for each phase.
Waveform display makes it easy to understand distortion conditions
that (as with harmonics) are difficult to grasp from numerical values
alone.
This displays detailed data for voltage, current, and power.
View the data necessary for power management or maintenance and
inspection of power lines at a single glance.
Select a waveform display
range of 2, 4, 10, or 12
cycles.
Display either dual screens
for voltage and current, or
waveforms for individual
voltage and current phases.
Detailed values for
voltage, current and
power are displayed.
The cursor value is displayed.
Vector display
Harmonics display
This displays the voltage and current vectors for each phase, as well as
RMS values and phase angles as numerical values.
This displays harmonics and inter-harmonics data in a graph or list.
You can also display the phase difference for each harmonic order, and
Easily check the phase of three-phase lines and harmonics.
work out the current direction for harmonics.
You can select all of the
connected channels.
The harmonic
order cursor
value is
Displays the unbalance
factor when measuring
three-phase power lines.
(For 3P3W3M and 3P4W
settings)
displayed.
Display the fundamental voltage waveform for the 1st order (U1, U2, and U3) as
a phase angle of 360˚ as a standard.
Ideal for checking three-phase power lines.
Inter-harmonics display
(light blue)
Detailed numerical data for up to the 50th harmonic
order is displayed in a list.
ASM-SENSOR [ ASM GMBH ]
