DC and Switching Characteristics
Table 5–35 shows the revision history for this chapter.
Document
Revision History
Table 5–35. Document Revision History (Part 1 of 2)
Date and
Document
Version
Changes Made
Summary of Changes
July 2008
v2.2
—
—
●
●
Updated Table 5–14 , Table 5–23 , and Table 5–24.
Added Note (5) to Table 5–4.
March 2008
v2.1
December 2007
v2.0
Updated document with
MAX IIZ information.
●
●
●
Updated Notes (3) and (4) to Table 5–1.
Updated Table 5–2 and added Note (5).
Updated ICCSTANDBY and ICCPOW ERUP information and
added IPULLUP information in Table 5–4.
●
●
●
●
Added Note (1) to Table 5–10.
Updated Figure 5–2.
Added Note (1) to Table 5–13.
Updated Tables 5–13 through 5–24, and Tables 5–27
through 5–33.
●
●
●
Added tCOMB information to Table 5–15.
Updated Figure 5–6.
Added “Referenced Documents” section.
December 2006
v1.8
—
—
—
●
●
Added note to Table 5–1.
Added document revision history.
July 2006
v1.7
●
Minor content and table updates.
February 2006
v1.6
●
●
●
Updated “External Timing I/O Delay Adders” section.
Updated Table 5–29.
Updated Table 5–30.
November 2005
v1.5
●
Updated Tables 5-2, 5-4, and 5-12.
—
—
August 2005
v1.4
●
●
●
Updated Figure 5-1.
Updated Tables 5-13, 5-16, and 5-26.
Removed Note 1 from Table 5-12.
June 2005
v1.3
●
●
●
●
●
●
Updated the RPULLUP parameter in Table 5-4.
Added Note 2 to Tables 5-8 and 5-9.
Updated Table 5-13.
Added “Output Drive Characteristics” section.
Added I2C mode and Notes 5 and 6 to Table 5-14.
Updated timing values to Tables 5-14 through 5-33.
—
Altera Corporation
July 2008
5–33
MAX II Device Handbook, Volume 1
ALTERA [ ALTERA CORPORATION ]
