Document Revision History
Table 13–14 shows the revision history for this document.
Document
Revision History
Table 13–14. Document Revision History
Date &
Document
Version
Changes Made
Summary of Changes
February 2007
v3.1
●
●
●
●
●
●
●
Added document revision history.
Added Note (1) to Table 13–1.
Added Note (1) to Table 13–4.
●
●
Changed unit ‘kw’ to ‘kΩ’ in Figures 13–6
and 13–7.
Added note about serial configuration
devices supporting 20 MHz and 40 MHz
DCLK.
Added infomation about the need for a
resistor on nCONFIGif reconfiguration is
required.
Added information about MSEL[1..0]
internal pull-down resistor value.
Updated Figure 13–3.
Updated Figures 13–6 and 13–7.
Updated Note (2) to Figure 13–13.
Updated “Single Device PS Configuration
Using a Configuration Device” section.
Updated Note (2) to Figure 13–14.
Updated Note (2) to Figure 13–15.
Updated Note (2) to Figure 13–16.
Updated Note (2) to Figure 13–17.
Updated Note (4) to Figure 13–21.
Updated Note (2) to Figure 13–25.
●
●
●
●
●
●
●
●
July 2005 v2.0
●
●
Updated “Configuration Stage” section.
Updated “PS Configuration Using a
Download Cable” section.
Updated Figures 13–8, 13–12, and
13–18.
—
—
●
November 2004
v1.1
●
●
Updated “Configuration Stage” section in
“Single Device AS Configuration” section.
Updated “Initialization Stage” section in
“Single Device AS Configuration” section.
Updated Figure 13–8.
Updated “Initialization Stage” section in
“Single Device PS Configuration Using a
MAX II Device as an External Host”
section.
●
●
●
●
Updated Table 13–7.
Updated “Single Device PS Configuration
Using a Configuration Device” section.
Updated “Initialization Stage” section in
“Single Device PS Configuration Using a
Configuration Device” section.
Updated Figure 13–18.
●
●
●
Updated “Single Device JTAG
Configuration” section.
June 2004 v1.0 Added document to the Cyclone II Device
Handbook.
—
13–72
Altera Corporation
February 2007
Cyclone II Device Handbook, Volume 1