Trigger
Maximum VA
Sample Application Programs
Input:
4155C and 4156C: 450 VA
41501B: 350 VA
Flash EEPROM test
TDDB
Constant I (Electromigration test)
V-Ramp test
J-Ramp test
SWEAT
GO/NO-GO test
HCI degradation test
Charging pump test
External trigger input starts a sweep
or sampling measurement or can be
used as a trigger input for continuing an
Instrument BASIC program.
Regulatory Compliance
EMC: EN 61326-1:%A1, AS/NZS 2064.1
Safety:
Input Level:
CSA C22.2 NO.1010.1 (1++2), IEC 61010-
1:%A2/EN 61010-1:%A2 UL3111-1:1++4
Certification:
TTL level, negative or positive edge
trigger
Output:
CE, CSA, NRTL/C, C-Tick
Dimensions
External edge trigger outputs can be
generated by the start of a sweep
measurement, the start of each sweep
step in a staircase sweep, the start of
each pulse leading edge for an SMU in
pulse mode, and the issuance of an an
IBASIC trigger out command execution.
In addition, you can set the trigger signal
to be active during the Stress Force
State. If you have a 41501A/B with PGU
option, you can output a synchronized
trigger output through the 41501A/B
trigger output.
4155C and 4156C: 235 mm H ꢁ
426 mm W ꢁ 600 mm D
41501B: 1+0 mm H ꢁ 426 mm W ꢁ
600 mm D
Sample VEE Program
Vth measurement using the 4155C or
4156C, the E5250A, and a wafer prober.
Weight (approx.)
4155C and 4156C: 21 kg
41501B: 16 kg (option 412, HPSMU % 2 ꢁ
PGU)
VXI plug&play Drivers
VXI plug&play drivers for the 4155C and
4156C
4155C and 4156C
Supported VXI plug&play operating
Furnished Accessories
systems:
Microsoft Windows +5, +8, NT, 2000
Professional, and XP Professional
Format
Output Level:
TTL level, negative or positive logic
Triaxial cable, 4 ea. (4155C)
Kelvin triaxial cable, 4 ea. (4156C)
Coaxial cable, 4 ea.
Tree-structured function panel.
Panel mode for hardware configuration and
manual parameter setting.
Parameter mode for variable definition and
I/O configuration.
4145B Data Compatibility and
Syntax Commands
Interlock cable, 1 ea.
Keyboard, 1 ea.
User manual, 1 set
Setup and data file
Sample application program disk, 1 ea.
Sample VEE program disk, 1 ea.
VXIplug&play drivers disk for the 4155C
and 4156C, 1 ea.
Measurement setup and data from the
4145B can be loaded.
General Specifications
GPIB program
GPIB programs for the 4145B can be used
VXIplug&play drivers disk for the E5250A,
1 ea.
LAN Interface Test Adapter, 1 ea.
Temperature range
when the 4145B command set is selected.
Note: There is a possibility that GPIB programs for the
4145B will need to be modified.
Operating:
%10 °C to %40 °C (if using floppy
disk drive)
%5 °C to %40 °C (if not using
floppy disk drive)
Interfaces
GPIB interface:
Storage: -22 °C to %60 °C
Humidity range
SH1, AH1, T6, L4, SR1, RL1, PP0, DC1,
DT1, C1, C2, C3, C4, C11, E2
Parallel interface: Centronics RJ45:
Ethernet IEEE 802.3 10BASE-T for a 10
Mbps CSMA/CD local area network
External keyboard:
Operating:
20ꢀ to 80ꢀ RH, non-condensing and
wet bulb temperature ≤2+ °C (if using
floppy disk drive)
15ꢀ to 80ꢀ RH, non-condensing and
wet bulb temperature ≤2+ °C (if not
using floppy disk drive)
Storage: 5ꢀ to +0ꢀ RH,
non-condensing and wet bulb tempera-
ture ≤3+ °C
Compatible PC-style 101-key keyboard
(mini DIN connector)
Interlock and LED connector R-BOX control
connector
Trigger in/out
SMU/PGU selector control connector
(41501B)
Altitude
Operating: 0 to 2,000 m (6,561 ft)
Storage: 0 to 4,600 m (15,0+1 ft)
Power requirement
+0 V to 264 V, 47 to 63 Hz
+
AGILENT [ AGILENT TECHNOLOGIES, LTD. ]
