MIL-PRF-38535K
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-M-38510
MIL-PRF-123
- Microcircuits, General Specification For
- Capacitors, Fixed, Ceramic Dielectric (Temperature stable and general purposes),
High Reliability, General Specification For
MIL-PRF-55681 - Capacitors, Chip, Multiple Layers, Fixed, Ceramic Dielectric, Established Reliability and
Non-Established Reliability, General Specification For
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883
MIL-STD-1285
- Test Method Standard Microcircuits
- Marking of Electrical and Electronic Parts
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-103 - List of Standard Microcircuit Drawings
MIL-HDBK-780 - Standard Microcircuit Drawings
MIL-HDBK-1331 - Parameters to be Controlled for the Specification of Microcircuits, Handbook For
(Copies of these documents are available online at http://quicksearch.dla.mil/ or from the Standardization Document Order
Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents, drawings,
and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
QML-38535
Qualified Manufacturers List of Products Qualified Under Performance Specification
MIL-PRF-38535 Integrated Circuits (Microcircuits) Manufacturing, General Specification For
(Copies of these documents are available online at http://quicksearch.dla.mil/ or from the Standardization Document Order
Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified herein.
Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
ASTM INTERNATIONAL (ASTM)
ASTM F1269
- Test Methods for Destructive Shear Testing of Ball Bonds.
(Copies of this document are available online at http://www.astm.org/ or from ASTM International, 100 Barr Harbor Drive,
P.O. Box C700, West Conshohocken, PA 19428-2959.)
2
ACTEL [ Actel Corporation ]
