Cable Assembly Instruction S
Crimp-crimp
STEP 1.
STEP 2.
STEP 3.
All parts of the connector are shown. A crimp tool is necessary
to complete the termination.
Strip the cable inner conductor, dielectric, braid, and jacket as per
"RECOMMENDED CABLE STRIPPING DIM'S" in catalog.
Insert inner conductor into the CONTACT PIN and crimp it with
the crimp tool as shown. Then slide the FERRULE onto cable.
STEP 4.
STEP 5.
Insert the MAIN BODY into braid and dielectric.
Slide the FERRULE over braid and crimp it with the crimp tool
as shown.
227
www.amphenol-online.com
ETC [ ETC ]
