2. Timer counter C (TCC)
Bit
7
TCC7
0
6
TCC6
0
5
TCC5
0
4
TCC4
0
3
TCC3
0
2
TCC2
0
1
TCC1
0
0
TCC0
0
Initial value
Read/Write
R
R
R
R
R
R
R
R
TCC is an 8-bit read-only up-counter, which is incremented by internal clock or external event
input. The clock source for input to this counter is selected by bits TMC2 to TMC0 in timer mode
register C (TMC). TCC values can be read by the CPU at any time.
When TCC overflows from H'FF to H'00 or to the value set in TLC, or underflows from H'00 to
H'FF or to the value set in TLC, the IRRTC bit in IRR2 is set to 1.
TCC is allocated to the same address as TLC.
Upon reset, TCC is initialized to H'00.
3. Timer load register C (TLC)
Bit
7
TLC7
0
6
TLC6
0
5
TLC5
0
4
TLC4
0
3
TLC3
0
2
TLC2
0
1
TLC1
0
0
TLC0
0
Initial value
Read/Write
W
W
W
W
W
W
W
W
TLC is an 8-bit write-only register for setting the reload value of timer counter C (TCC).
When a reload value is set in TLC, the same value is loaded into timer counter C as well, and TCC
starts counting up from that value. When TCC overflows or underflows during operation in auto-
reload mode, the TLC value is loaded into TCC. Accordingly, overflow/underflow periods can be
set within the range of 1 to 256 input clocks.
The same address is allocated to TLC as to TCC.
Upon reset, TLC is initialized to H'00.
4. Clock stop register 1 (CKSTPR1)
7
6
5
4
3
2
1
0
Bit:
S1CKSTP S31CKSTP S32CKSTP ADCKSTP TGCKSTP TFCKSTP TCCKSTP TACKSTP
1
1
1
1
1
1
1
Initial value:
Read/Write:
1
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
CKSTPR1 is an 8-bit read/write register that performs module standby mode control for peripheral
modules. Only the bit relating to timer C is described here. For details of the other bits, see the
sections on the relevant modules.
193
ETC [ ETC ]
