C L A S S
DC SWITCHING POWER RELAY
199
CLASS 199B
DPDT WITH MAGNETIC
BLOWOUT FOR DC ARC
QUENCHING
10 AMP @ 110 VDC
UL Listed
File No. E43641
COMPLIES WITH
REQUIREMENTS OF
IEC STANDARDS
*
947-4-1 AND 947-5-1
LOW VOLTAGE DIRECTIVE
CLASS "B" COIL
INSULATION SYSTEM
IEC = INTERNATIONAL
ELECTROTECHNICAL COMMISSION
*
OUTLINE DIMENSIONS
Dimensions shown in Inch & (Millimeters)
SPECIFICATIONS CLASS 199
COIL
Pull-in Voltage:
80% DC Coils, 85% AC coils of
nominal voltage or Less @ 25˚C
10% of Nominal Voltage or More ™ 25˚C
± 10% @ 25˚C
2.53 Max.
(64.3)
Dropout Voltage:
Coil Resistance:
Max. Coil Dissipation:
DC Coils-4 Watts Max. Continuous.
CONTACTS
DPDT
Contact Combinations:
30 Amps up to 300 VAC, 50/60Hz
5 Amps@ 480/600VAC ,0.75pFInductive
Load. 1-1/2 HP Motor Load (each Pole)
@ 120 thru 600 VAC, 50/60 Hz. 2 HP
Motor Load @ 200 thru 600 VAC, 50/60
Hz only when using two poles to switchboth
sides of Load 30Amps @ 28VDC Resistive
Each Pole.
Contact Rating :
1.62
1.87
(47.5
(41.14)
3.12
(79.24
2.50
(63.5)
.375
(9.5)
0.187 Dia.
(2 Places)
UP
NEMA A600 Pilot Duty 50/60 Hz
VERTICAL MOUNTING
RECOMMENDED WITH
CONTACTS UP
10 Amps @ 110 VDC, Resistive; 4 Amps
at 220 VDC, Resistive, 2 Amps @ 325VDC
Resistive. For inductive Loads, contacts
must be derated accordingly. Capacitive
loads must have current limiting to insure
that inrush current will not exceed 50 Amps
DC Ratings:
Silver Cadmium Oxide, Gold Flashed.
5/16" Diameter Standard.
Contact Material:
* RELEVANT IEC CONTACT UTILIZATION CATEGORIES
TIMING
AC-1, AC-3, DC-1, AC-15
40 Milliseconds Max. @ Nominal V
30 Milliseconds Max. @ Nominal V
Operate time:
Release Time:
SEE SECTION 11, FOR RELEVANT UTILIZATION CATEGORIES
DIELECTRIC STRENGTH
Between Open Contacts:
Mutually Insulated
1500 V rms
2200 V rms
Measured @ 25˚C
COIL
CROSS
Conductive elements:
NOMINAL
RESIS-
NOMINAL
POWER
REFERENCE
POTTER &
BRUMFIELD
PART
NUMBERS
NOMINAL
INPUT
VOLTAGE
TEMPERATURE
Operating Range:
Non-Operating Storage
range:
(AC) -30˚C to +50˚C, (DC) -30˚C +60˚C
-30˚C to +100˚C
TANCE
(OHMS)
AC OPERATED (DPDT WITH BLOW OUT MAGNET)
LIFE
-
120 VAC
PRD11AJ0-120
DC OPERATED (DPDT WITH BLOW OUT MAGNET)
6000
10 VA
W199ABX-14
100,000 Operations
5,000,000 Operations
Electrical (Rated Load)
Mechanical (No Load)
MISCELLANEOUS
Coil Terminals:
110 VDC
PRD11DJ0-110
2.0 W
W199BX-14
6-32 Binder Head Screws
8-32 Binder Head Screws
Molded Phenolic, UL Recognized
(QMFZ2)
Contact Terminals:
Base Material
PART NUMBERS SHOWN ALSO AVAILABLE THRU STOCKING DISTRIBUTION.
AUXILIARY CONTACTS AND OTHER COIL VOLTAGES ARE
AVAILABLE ON SPECIAL ORDER. CONTACT FACTORY FOR
SPECIAL REQUIREMENTS.
11 oz. - 312 Grams approx.. (DPDT)
Weight:
PAGE 146
WEBSITE: www.magnecraft.com EMAIL:info@magnecraft.com FAX ON DEMAND 1-800/891-2957, DOCUMENT 100
ETC [ ETC ]
