C L A SS
OPEN STYLE POWER RELAY
199
CLASS 199DB
SPST-NO-DM WITH
UL Listed
File No. E43641
COMPLIES WITH
REQUIREMENTS OF
MAGNETIC BLOWOUT
FOR DC ARC QUENCING
IEC STANDARDS
*
947-4-1 AND 947-5-1
LOW VOLTAGE DIRECTIVE
IEC = INTERNATIONAL
ELECTROTECHNICAL COMMISSION
*
OUTLINE DIMENSIONS
Dimensions shown in Inch & (Millimeters)
2.18 Max.
(55.4)
.375
(9.5)
UP
VERTICAL MOUNTING
RECOMMENDED WITH
CONTACTS UP
1.62
41.14
2.43 Max.
(61.7)
1.87
(47.5)
0.10
(2.54)
2.50
(63.5)
0.187 Dia.
(2 Places)
SPECIFICATIONS CLASS 199
TIMING
COIL
Pull-in Voltage:
80% DC Coils, 85% AC coils of
Operate time:
40 Milliseconds Max. @ Nominal V
30 Milliseconds Max. @ Nominal V
nominal voltage or Less @ 25˚C
10% of Nominal Voltage or More @ 25˚C
± 10% Measured @ 25˚C
Release Time:
Dropout Voltage:
Coil Resistance:
Max. Coil Dissipation:
DC Coils-4 Watts Max. Continuous.
DIELECTRIC STRENGTH
Between Open Contacts:
Mutually Insulated
1500 V rms
2200 V rms
CONTACTS
Conductive elements:
Contact Combinations:
SPST-NO-DM Double Make
TEMPERATURE
Operating Range:
Non-Operating Storage
range:
Contact Rating :
30 Amps up to 300 VAC, 50/60Hz, 5 Amps
@ 480/600Vac,0.75pFInductive Load.
1-1/2 HP Motor Load (each Pole) @ 120 thru
600 VAC, 50/60 Hz.
2 HP Motor Load @ 200 thru 600 VAC, 50/60 Hz
only when using two poles toswitch.
30Amps @ 28VDCResistive Each Pole.
NEMA A600 Pilot Duty 50/60Hz
(AC) -30˚C to +50˚C, (DC) -30˚C +60˚C
-30˚C to +100˚C
LIFE
Electrical (Rated Load):
Mechanical (No Load):
100,000 Operations
5,000,000 Operations
Additional Ratings, with
Blowout Magnet for DC
switching:
MISCELLANEOUS
Coil Terminals:
Contact Terminals:
Base Material:
Weight:
20 Amps @ 110 VDC, Resistive; 8 Amps at 220 VDC,
Resistive, 4 Amps @ 325VDC Resistive. 2 amps @
500 VDC resistive. For Inductive Loads, contacts
must be derated accordingly. Capacitive loads must
be limited to insure that inrush current will not exceed
100 Amps.
6-32 Binder Head Screws
8-32 Binder Head Screws
Molded Phenolic, UL Recognized (QMFZ2)
8 oz. - 227 Grams approx. (SPST-NO-DM)
Contact Material:
Silver Cadmium Oxide, Gold Flashed.
5/16" Diameter Standard.
* RELEVANT IEC CONTACT UTILIZATION CATEGORIES
AC-1, AC-3, DC-1, AC-15
SEE SECTION 11, FOR RELEVANT UTILIZATION CATEGORIES
COIL Measured @ 25˚C
CROSS
PART
NUMBER
NOMINAL
RESIS-
REFERENCE
POTTER &
BRUMFIELD
NOMINAL
INPUT
VOLTAGE
NOMINAL
POWER
TANCE
(OHMS)
AC OPERATED (SPST-NO-DM WITH MAGNETIC BLOWOUT)
-
10 VA PRD3AJ0-120
120 VAC
W199ADBX-4
PART NUMBERS SHOWN ALSO AVAILABLE THRU STOCKING DISTRIBUTION.
AUXILIARY CONTACTS AND OTHER COIL VOLTAGES ARE
AVAILABLE ON SPECIAL ORDER. CONTACT FACTORY FOR
SPECIAL REQUIREMENTS.
PAGE 143
WEBSITE: www.magnecraft.com EMAIL:info@magnecraft.com FAX ON DEMAND 1-800/891-2957, DOCUMENT 100
ETC [ ETC ]
