欢迎访问ic37.com |
会员登录 免费注册
发布采购

FW82443BX 参数 Datasheet PDF下载

FW82443BX图片预览
型号: FW82443BX
PDF下载: 下载PDF文件 查看货源
内容描述: 控制器杂项 - 数据表参考\n [Controller Miscellaneous - Datasheet Reference ]
分类和应用: 控制器
文件页数/大小: 132 页 / 642 K
品牌: ETC [ ETC ]
 浏览型号FW82443BX的Datasheet PDF文件第78页浏览型号FW82443BX的Datasheet PDF文件第79页浏览型号FW82443BX的Datasheet PDF文件第80页浏览型号FW82443BX的Datasheet PDF文件第81页浏览型号FW82443BX的Datasheet PDF文件第83页浏览型号FW82443BX的Datasheet PDF文件第84页浏览型号FW82443BX的Datasheet PDF文件第85页浏览型号FW82443BX的Datasheet PDF文件第86页  
Register Description  
3.4.16  
SSTS—Secondary PCI-to-PCI Status Register (Device 1)  
Address Offset:  
Default Value:  
Access:  
1E–1Fh  
02A0h  
Read Only, Read/Write Clear  
16 bits  
Size:  
SSTS is a 16-bit status register that reports the occurrence of error conditions associated with  
secondary side (i.e. AGP side) of the “virtual” PCI-to-PCI bridge embedded within 82443BX.  
Bit  
Descriptions  
Detected Parity Error (DPE1). Note that the PERRE1 bit does not affect the function of this bit.  
Also the PERR# is not implemented in the 82443BX.  
15  
1 = 82443BX detected of a parity error in the address or data phase of AGP bus transactions.  
0 = Software sets DPE1 to 0 by writing a 1 to this bit.  
Received System Error (SSE1).  
1 = 82443BX asserted SERR# for any enabled error condition under device 1. Device 1 error  
conditions are enabled in the SSTS and BCTRL registers.  
14  
13  
0 = Software clears SSE1 to 0 by writing a 1 to this bit.  
Received Master Abort Status (RMAS1).  
1 = 82443BX terminates a Host-to-AGP with an unexpected master abort.  
0 = Software resets this bit to 0 by writing a 1 to it.  
Received Target Abort Status (RTAS1).  
12  
11  
1 = 82443BX-initiated transaction on AGP is terminated with a target abort.  
0 = Software resets RTAS1 to 0 by writing a 1 to it.  
Signaled Target Abort Status (STAS1). STAS1 is hardwired to a 0, since the 82443BX does not  
generate target abort on AGP.  
DEVSEL# Timing (DEVT1). This 2-bit field indicates the timing of the DEVSEL# signal when the  
82443BX responds as a target on AGP, and is hard-wired to the value 01b (medium) to indicate  
the time when a valid DEVSEL# can be sampled by the initiator of the PCI cycle.  
10:9  
01 = Medium. (hardwired)  
Data Parity Detected (DPD1). Hardwired to 0. 82443BX does not implement G_PERR# function.  
However, data parity errors are still detected and reported on SERR# (if enabled by SERRE,  
SERRE1 and the BCTRL register, bit 0).  
8
7
Fast Back-to-Back (FB2B1). This bit is hardwired to 1. The 82443BX as a target supports fast  
back-to-back transactions on AGP.  
6
5
Reserved.  
66/60MHZ Capability. Hardwired to 1.  
4:0  
Reserved.  
3-56  
82443BX Host Bridge Datasheet  
 复制成功!