CXD3018Q/R
Command bit
TXOUT = 0
TXOUT = 1
Processing
Various signals except for CD TEXT is output from the SQSO pin.
CD TEXT data is output from the SQSO pin.
See "§4-14. CD TEXT Data Demodulation"
Command bit
Processing
WFCK, XPCK C4M, WDCK and FSTO are output. The signal input to FSTI is supplied
to the digital servo block.
OUTL1 = 0
OUTL1 = 1
WFCK, XPCK C4M, WDCK and FSTO outputs are set to low. FSTO and FSTI are
internally connected. Set FSTI to low.
Command bit
OUTL0 = 0
Processing
PCMD, BCK, LRCK and EMPH are output.
PCMD, BCK, LRCK and EMPH outputs are low.
OUTL0 = 1
PCMD and PCMDI, BCK and BCKI, LRCK and LRCKI and EMPH and EMPHI are
internally connected. Set PCMDI, BCKI, LRCKI and EMPHI to low.
OUTL0 is the command which controls the PCMD, BCK, LRCK and EMPH external outputs.
The IC internal PCMD, BCK, LRCK and EMPH are connected to the built-in DAC regardless of OUTL0=1 or 0.
– 38 –
ETC [ ETC ]
