Z8018x Family
MPU User Manual
87
Refresh cycles may be programmed to be either two or three clock cycles
in duration by programming the REFW (Refresh Wait) bit in the Refresh
Control Register (RCR). The external WAIT input and the internal Wait
State generator are not effective during refresh.
Figure 44 depicts the timing of a refresh cycle with a refresh wait (TRW)
cycle.
MCi
Refresh cycle
MCi+1
TR1 TRW* TR2
Refresh signal
(Internal signal)
A0 — A7
Refresh address
MREQ
RFSH
NOTE: * If three refresh cycles are specified, TRW is inserted.
Otherwise, TRW is not inserted
MC: Machine Cycle
Figure 44. Refresh Cycle Timing Diagram
UM005001-ZMP0400
ZILOG [ ZILOG, INC. ]
