WM8750L
Production Data
DIGITAL ADC VOLUME CONTROL
The output of the ADCs can be digitally amplified or attenuated over a range from –97dB to +30dB in
0.5dB steps. The volume of each channel can be controlled separately. The gain for a given eight-bit
code X is given by:
0.5 (X-195) dB for 1 X 255;
MUTE for X = 0
The LAVU and RAVU control bits control the loading of digital volume control data. When LAVU or
RAVU are set to 0, the LADCVOL or RADCVOL control data will be loaded into the respective control
register, but will not actually change the digital gain setting. Both left and right gain settings are
updated when either LAVU or RAVU are set to 1. This makes it possible to update the gain of both
channels simultaneously.
REGISTER
ADDRESS
BIT
LABEL
LAVU
DEFAULT
DESCRIPTION
R21 (15h)
Left ADC Volume Update
8
0
Left ADC
Digital Volume
0 = Store LADCVOL in intermediate
latch (no gain change)
1 = Update left and right channel
gains (left = LADCVOL, right =
intermediate latch)
LADCVOL
[7:0]
Left ADC Digital Volume Control
0000 0000 = Digital Mute
0000 0001 = -97dB
7:0
11000011
( 0dB )
0000 0010 = -96.5dB
... 0.5dB steps up to
1111 1111 = +30dB
R22 (16h)
RAVU
Right ADC Volume Update
8
0
Right ADC
Digital Volume
0 = Store RADCVOL in intermediate
latch (no gain change)
1 = Update left and right channel
gains (left = intermediate latch, right
= RADCVOL)
RADCVOL
[7:0]
Right ADC Digital Volume Control
0000 0000 = Digital Mute
0000 0001 = -97dB
7:0
11000011
( 0dB )
0000 0010 = -96.5dB
... 0.5dB steps up to
1111 1111 = +30dB
Table 12 ADC Digital Volume Control
PD, Rev 4.4, August 2012
24
w
WOLFSON [ WOLFSON MICROELECTRONICS PLC ]
