欢迎访问ic37.com |
会员登录 免费注册
发布采购

WM8199SCDS 参数 Datasheet PDF下载

WM8199SCDS图片预览
型号: WM8199SCDS
PDF下载: 下载PDF文件 查看货源
内容描述: 20MSPS的16位CCD数字转换器 [20MSPS 16-bit CCD Digitiser]
分类和应用: 转换器
文件页数/大小: 30 页 / 360 K
品牌: WOLFSON [ WOLFSON MICROELECTRONICS PLC ]
 浏览型号WM8199SCDS的Datasheet PDF文件第9页浏览型号WM8199SCDS的Datasheet PDF文件第10页浏览型号WM8199SCDS的Datasheet PDF文件第11页浏览型号WM8199SCDS的Datasheet PDF文件第12页浏览型号WM8199SCDS的Datasheet PDF文件第14页浏览型号WM8199SCDS的Datasheet PDF文件第15页浏览型号WM8199SCDS的Datasheet PDF文件第16页浏览型号WM8199SCDS的Datasheet PDF文件第17页  
WM8199  
Production Data  
RLC/ACYC MCLK VSMP  
TIMING CONTROL  
FROM CONTROL  
INTERFACE  
CL  
RS  
VS  
CIN  
S/H  
+
-
TO OFFSET DAC  
+
RINP  
2
S/H  
1
RLC  
CDS  
INPUT SAMPLING  
BLOCK FOR RED  
CHANNEL  
EXTERNAL VRLC  
CDS  
VRLC/  
VBIAS  
4-BIT  
RLC DAC  
FROM CONTROL  
INTERFACE  
VRLCEXT  
Figure 8 Reset Level Clamping and CDS Circuitry  
If auto-cycling is not required, RLC can be selected by pin RLC/ACYC. Figure 9 illustrates control of  
RLC for a typical CCD waveform, with CL applied during the reset period.  
The input signal applied to the RLC pin is sampled on the positive edge of MCLK that occurs during  
each VSMP pulse. The sampled level, high (or low) controls the presence (or absence) of the internal  
CL pulse on the next reset level. The position of CL can be adjusted by using control bits  
CDSREF[1:0] (Figure 10).  
If auto-cycling is required, pin RLC/ACYC is no longer available for this function and control bit  
RLCINT determines whether clamping is applied.  
MCLK  
VSMP  
ACYC/RLC  
or RLCINT  
1
X
X
0
X
X
0
Programmable Delay  
CL  
(CDSREF = 01)  
INPUT VIDEO  
RGB  
RGB  
RGB  
RLC on this Pixel  
No RLC on this Pixel  
Figure 9 Relationship of RLC Pin, MCLK and VSMP to Internal Clamp Pulse, CL  
The VRLC/VBIAS pin can be driven internally by a 4-bit DAC (RLCDAC) by writing to control bits  
RLCV[3:0]. The RLCDAC range and step size may be increased by writing to control bit  
RLCDACRNG. Alternatively, the VRLC/VBIAS pin can be driven externally by writing to control bit  
VRLCEXT to disable the RLCDAC and then applying a d.c. voltage to the pin.  
CDS/NON-CDS PROCESSING  
For CCD type input signals, the signal may be processed using CDS, which will remove pixel-by-pixel  
common mode noise. For CDS operation, the video level is processed with respect to the video reset  
level, regardless of whether RLC has been performed. To sample using CDS, control bit CDS must  
be set to 1 (default), this controls switch 2 (Figure 8) and causes the signal reference to come from  
the video reset level. The time at which the reset level is sampled, by clock Rs/CL, is adjustable by  
programming control bits CDSREF[1:0], as shown in Figure 10.  
PD Rev 3.2 November 2003  
13  
w
 复制成功!