欢迎访问ic37.com |
会员登录 免费注册
发布采购

XC9128D45CAR 参数 Datasheet PDF下载

XC9128D45CAR图片预览
型号: XC9128D45CAR
PDF下载: 下载PDF文件 查看货源
内容描述: 1A驱动三极管内置的升压型DC / DC转换器 [1A Driver Transistor Built-In, Step-Up DC/DC Converters]
分类和应用: 转换器驱动
文件页数/大小: 13 页 / 339 K
品牌: TOREX [ Torex Semiconductor ]
 浏览型号XC9128D45CAR的Datasheet PDF文件第5页浏览型号XC9128D45CAR的Datasheet PDF文件第6页浏览型号XC9128D45CAR的Datasheet PDF文件第7页浏览型号XC9128D45CAR的Datasheet PDF文件第8页浏览型号XC9128D45CAR的Datasheet PDF文件第9页浏览型号XC9128D45CAR的Datasheet PDF文件第11页浏览型号XC9128D45CAR的Datasheet PDF文件第12页浏览型号XC9128D45CAR的Datasheet PDF文件第13页  
XC9128/XC9129 Series  
NOTE ON USE (Continued)  
7. P-ch synchronous switching transistor operation  
The parasitic diode of the P-ch synchronous transistor is placed between Lx (anode) and VOUT (cathode), so that the  
power line can not be turned off from Lx to VOUT. On the other hand, the power line switch from VOUT to Lx is shown in the  
table below.  
XC9128 Series  
EN Pin  
AEN/Pin  
P-channel Synchronous Switch Transistor Operation  
H
H
L
H
L
OFF  
Switching  
OFF  
H
L
L
Undefined  
XC9129 Series  
EN Pin  
P-channel Synchronous Switch Transistor Operation  
H
L
Switching  
Undefined  
With the XC9128B/XC9129B series, when step-up operation stops as a result of the latch condition working when the  
maximum current limit level is reached, the synchronous P-channel transistor will remain ON.  
8. The maximum current limiter controls the limit of the N-channel driver transistor by monitoring current flow. This function  
does not limit the current flow of the P-channel synchronous transistor.  
9. The integral latch time of the XC9128B/XC9129B series could be released from the maximum current detection state as a  
result of board mounting conditions. This may extend integral latch time or the level required for latch operation to  
function may not be reached. Please connect the output capacitor as close to the IC as possible.  
10. With the XC9128B/XC9129B series, when the EN pin is left open or applied in the range of 0.2V0.65V, the integral  
latch or the VLVP may not be able to release. Please make sure that the EN pin voltage is less than 0.2V or more than  
0.65V, or use the XC9128D/XC9129D series which does not have the integral latch and the LVP functions.  
11. With the XC9128B/XC9129B series, please make the VOUT pin voltage become more than 1.5V within the soft-start time,  
otherwise the VLVP is detected. Also, the operation may become unstable, please test and verify the operation in the  
actual circuits thoroughly before use.  
12. When used in small step-up ratios, the device may skip pulses during PWM control mode.  
10/13  
 复制成功!