UCD9090
SLVSA30A –APRIL 2011–REVISED AUGUST 2011
www.ti.com
limit. The rail is still in regulation until the voltage drops below power-good off (POWER_GOOD_OFF). In the
case that there isn't voltage monitoring set for a given rail, that rail is considered ON if it is commanded on (either
by
OPERATION
command,
PMBUS
CNTRL
pin,
or
auto-enable)
and
(TON_DELAY
+
TON_MAX_FAULT_LIMIT) time passes. Also, a rail is considered OFF if that rail is commanded OFF and
(TOFF_DELAY + TOFF_MAX_WARN_LIMIT) time passes
14
Copyright © 2011, Texas Instruments Incorporated