TVP5160
SLES135E–FEBRUARY 2005–REVISED APRIL 2011
www.ti.com
Table 3-37. SCART Delay
Subaddress 2Ch
Default
56h
7
6
5
4
3
2
1
0
Reserved
SCART delay [6:0]
This register must be changed in multiples of 2 to maintain the CbCr relationship. SCART delay[6:0]: Adjusts delay between CVBS and
component video.
101 1111 = 9 pixel delay
⋮
101 0111 = 1 pixel delay
101 0110 = 0 delay (default)
101 0101 = –1 pixel delay
⋮
000 0000 = –86 pixel delay
Table 3-38. CTI Control
Subaddress 2Eh
Default
00h
7
6
5
4
3
2
1
0
CTI coring [3:0]
CTI gain [3:0]
CTI coring [3:0]: 4-bit CTI coring limit control values, unsigned, linear control range from 0 to ±60, step size = 4
1111 = ±60
⋮
0001 = ±4
0000 = 0 (default)
CTI gain [3:0]: 4-bit CTI gain control values, unsigned, linear control range from 0 to 15/16, step size = 1/16
1111 = 15/16
⋮
0001 = 1/16
0000 = 0 (default)
Table 3-39. Brightness and Contrast Range Extender
Subaddress 2Fh
Default
00h
7
6
5
4
3
2
1
0
Reserved
Contrast
multiplier
Brightness multiplier [3:0]
Contrast multiplier [4]: (MC) Increases the contrast control range for composite and S-Video modes.
0 = 2x contrast control range (default), Gain = n/64 – 1 where n is the contrast control and 64 ≤ n ≤ 255
1 = Normal contrast control range, Gain = n/128 where n is the contrast control and 0 ≤ n ≤ 255
Brightness multiplier [3:0]: (MB) Increases the brightness control range for composite and S-Video modes from 1x to 16x.
0h = 1x(default)
1h = 2x
3h = 4x
7h = 8x
Fh = 16x
Note: In general, the brightness multiplier should be set to 0h for 10-bit outputs and 3h for 8-bit outputs
56
Internal Control Registers
Copyright © 2005–2011, Texas Instruments Incorporated
Submit Documentation Feedback
focus.ti.com: TVP5160