T MS 3 20 VC 54 02
F IX EDĆPO I NT DI GI TAL SI G NAL P RO C ES S O R
SPRS079E – OCTOBER 1998 – REVISED AUGUST 2000
software-programmable wait-state generator (continued)
Table 2. Software Wait-State Register (SWWSR) Bit Fields
BIT
RESET
VALUE
FUNCTION
NO.
NAME
Extended program address control bit. XPA is used in conjunction with the program space fields
(bits 0 through 5) to select the address range for program space wait states.
15
XPA
0
1
I/O space. The field value (0–7) corresponds to the base number of wait states for I/O space accesses
within addresses 0000–FFFFh. The SWSM bit of the SWCR defines a multiplication factor of 1 or 2 for
the base number of wait states.
14–12
11–9
8–6
I/O
Upper data space. The field value (0–7) corresponds to the base number of wait states for external
data space accesses within addresses 8000–FFFFh. The SWSM bit of the SWCR defines a
multiplication factor of 1 or 2 for the base number of wait states.
Data
Data
1
1
Lower data space. The field value (0–7) corresponds to the base number of wait states for external
data space accesses within addresses 0000–7FFFh. The SWSM bit of the SWCR defines a
multiplication factor of 1 or 2 for the base number of wait states.
Upper program space. The field value (0–7) corresponds to the base number of wait states for external
program space accesses within the following addresses:
-
-
XPA = 0: x8000 – xFFFFh
5–3
2–0
Program
Program
1
1
XPA = 1: The upper program space bit field has no effect on wait states.
The SWSM bit of the SWCR defines a multiplication factor of 1 or 2 for the base number of wait
states.
Program space. The field value (0–7) corresponds to the base number of wait states for external
program space accesses within the following addresses:
-
-
XPA = 0: x0000–x7FFFh
XPA = 1: 00000–FFFFFh
The SWSM bit of the SWCR defines a multiplication factor of 1 or 2 for the base number of wait
states.
The software wait-state multiplier bit of the software wait-state control register (SWCR) is used to extend the
base number of wait states selected by the SWWSR. The SWCR bit fields are shown in Figure 5 and described
in Table 3.
15
1
0
SWSM
Reserved
R/W-0
R/W-0
LEGEND: R = Read, W = Write
Figure 5. Software Wait-State Control Register (SWCR) [MMR Address 002Bh]
Table 3. Software Wait-State Control Register (SWCR) Bit Fields
PIN
NAME
RESET
VALUE
FUNCTION
NO.
15–1
Reserved
0
These bits are reserved and are unaffected by writes.
Software wait-state multiplier. Used to multiply the number of wait states defined in the SWWSR by a factor
of 1 or 2.
0
SWSM
0
-
-
SWSM = 0: wait-state base values are unchanged (multiplied by 1).
SWSM = 1: wait-state base values are mulitplied by 2 for a maximum of 14 wait states.
17
POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251–1443