ꢀ ꢁꢂ ꢃ ꢄ ꢅ ꢆꢇ ꢈ ꢉꢈ ꢀꢊ ꢀ ꢁꢂ ꢃ ꢄ ꢅ ꢆꢇ ꢈ ꢉꢋ ꢀꢊ ꢀ ꢁꢂ ꢃ ꢄꢅ ꢆꢇ ꢈꢉ ꢇꢀ
ꢌ ꢍꢎ ꢏꢐꢑꢒꢓ ꢍ ꢔꢀ ꢐꢍ ꢕꢍ ꢀꢖꢗ ꢂꢍ ꢕ ꢔꢖꢗ ꢒꢘ ꢓ ꢆꢏ ꢂ ꢂꢓ ꢘ ꢂ
SPRS226H − NOVEMBER 2003 − REVISED AUGUST 2005
DEVICE CONFIGURATIONS (CONTINUED)
Table 28. Device Configuration Pins (BEA[20:13, 9:7], HD5, and BEA11)
CONFIGURATION
PIN
NO.
FUNCTIONAL DESCRIPTION
Device Endian mode (LEND)
BEA20
E16
0
1
–
−
System operates in Big Endian mode
System operates in Little Endian mode (default)
Bootmode [1:0]
00 – No boot
01 − HPI boot
[D18,
C18]
BEA[19:18]
10 − EMIFB 8-bit ROM boot with default timings (default mode)
11 − Reserved
EMIFA input clock select
Clock mode select for EMIFA (AECLKIN_SEL[1:0])
00 – AECLKIN (default mode)
01 − CPU/4 Clock Rate
10 − CPU/6 Clock Rate
11 − Reserved
[B18,
A18]
BEA[17:16]
BEA[15:14]
EMIFB input clock select
Clock mode select for EMIFB (BECLKIN_SEL[1:0])
00 – BECLKIN (default mode)
01 − CPU/4 Clock Rate
[D17,
C17]
10 − CPU/6 Clock Rate
11 − Reserved
PCI EEPROM Auto-Initialization (EEAI) [C6415T and C6416T devices only]
[The C6414T device does not support the PCI peripheral; for proper device operation, do not oppose
the internal pulldown (IPD) on the BEA13 pin.]
PCI auto-initialization via external EEPROM
0
−
PCI auto-initialization through EEPROM is disabled; the PCI peripheral uses the specified
PCI default values (default).
1
−
PCI auto-initialization through EEPROM is enabled; the PCI peripheral is configured
through EEPROM provided the PCI peripheral pin is enabled (PCI_EN = 1) and the
McBSP2 peripheral pin is disabled (MCBSP2_EN = 0).
BEA13
B17
Note: If the PCI peripheral is disabled (PCI_EN pin = 0), this pin must not be pulled up.
For more information on the PCI EEPROM default values, see the TMS320C6000 DSP Peripheral
Component Interconnect (PCI) Reference Guide (literature number SPRU581).
UTOPIA Enable (UTOPIA_EN) [C6415T and C6416T devices only]
[The C6414T device does not support the UTOPIA peripheral; for proper device operation, do not
oppose the internal pulldown (IPD) on the BEA11 pin.]
UTOPIA peripheral enable (functional)
0
−
UTOPIA peripheral disabled (McBSP1 functions are enabled). [default]
This means all multiplexed McBSP1/UTOPIA pins function as McBSP1 and all other
standalone UTOPIA pins are tied-off (Hi-Z).
BEA11
D16
1
−
UTOPIA peripheral enabled (McBSP1 functions are disabled).
This means all multiplexed McBSP1/UTOPIA pins now function as UTOPIA and all other
standalone McBSP1 pins are tied-off (Hi-Z).
39
POST OFFICE BOX 1443 • HOUSTON, TEXAS 77251−1443
TI [ TEXAS INSTRUMENTS ]
