4.44 Power Management Control/Status Register
The power management control/status register determines and changes the current power state of the
PCI6x21/PCI6x11 CardBus function. The contents of this register are not affected by the internally generated reset
caused by the transition from the D3 to D0 state. See Table 4−20 for a complete description of the register contents.
hot
All PCI registers, ExCA registers, and CardBus registers are reset as a result of a D3 -to-D0 state transition, with
hot
the exception of the PME context bits (if PME is enabled) and the GRST only bits.
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Name
Type
Default
Power management control/status
RWC
0
R
0
R
0
R
0
R
0
R
0
R
0
RW
0
R
0
R
0
R
0
R
0
R
0
R
0
RW
0
RW
0
Register:
Offset:
Type:
Power management control/status
A4h (Functions 0, 1)
Read-only, Read/Write, Read/Write/Clear
0000h
Default:
Table 4−20. Power Management Control/Status Register Description
BIT
SIGNAL
TYPE
FUNCTION
PME status. This bit is set when the CardBus function would normally assert the PME signal, independent
of the state of the PME_EN bit. This bit is cleared by a writeback of 1, and this also clears the PME signal
if PME was asserted by this function. Writing a 0 to this bit has no effect.
15 †
PMESTAT
RC
14−13
12−9
DATASCALE
DATASEL
R
R
This 2-bit field returns 0s when read. The CardBus function does not return any dynamic data.
Data select. This 4-bit field returns 0s when read. The CardBus function does not return any dynamic data.
This bit enables the function to assert PME. If this bit is cleared, then assertion of PME is disabled. This
bit is not cleared by the assertion of PRST. It is only cleared by the assertion of GRST.
8 ‡
PME_ENABLE
RSVD
RW
R
7−2
Reserved. These bits return 0s when read.
Power state. This 2-bit field is used both to determine the current power state of a function and to set the
function into a new power state. This field is encoded as:
00 = D0
01 = D1
10 = D2
1−0
PWRSTATE
RW
11 = D3
hot
†
One or more bits in this register are PME context bits and can be cleared only by the assertion of GRST when PME is enabled. If PME is not
enabled, then this bit is cleared by the assertion of PRST or GRST.
One or more bits in this register are cleared only by the assertion of GRST.
‡
4−32
TI [ TEXAS INSTRUMENTS ]
