Electrical characteristics
STNRGPF01
5.3.1
VCOUT external capacitor
The stabilization of the main regulator is achieved by connecting an external capacitor
(a)
C
to the VCOUT pin. C
is specified in Table 7: General operating conditions.
VCOUT
VCOUT
Care should be taken to limit the series inductance to less than 15 nH.
Figure 17. External capacitor C
VCOUT
5.3.2
Supply current characteristics
The STNRGPF01 current consumption is declared based on, for example, an application
where the application firmware is loaded and running.
Table 9. Supply current characteristics
Symbol
Parameter
Test condition
Min. Typ.(1) Max.(1) Unit
VDD/VDDA SECTION: current consumption
IDD(RUN) Total current consumption
VDD/VDDA = 5 V
-
28
34
mA
1. Test conditions:
Data based on characterization results not tested in production.
Temperature operating: TA = 25 °C.
Device in the run mode.
a. ESR is the equivalent series resistance and ESL is the equivalent inductance.
DocID030377 Rev 2
26/40
STMICROELECTRONICS [ ST ]
