M93C86, M93C76, M93C66, M93C56, M93C46
Instructions
5.6
Write All
As with the Erase All Memory (ERAL) instruction, the format of the Write All Memory with
same Data (WRAL) instruction requires that a dummy address be provided. As with the
Write Data to Memory (WRITE) instruction, the format of the Write All Memory with same
Data (WRAL) instruction requires that an 8-bit data byte, or 16-bit data word, be provided.
This value is written to all the addresses of the memory device. The completion of the cycle
can be detected by monitoring the READY/BUSY line, as described next.
Figure 6.
WRAL sequence
WRITE
ALL
S
CHECK
STATUS
D
Q
1 0 0 0 1 Xn X0 Dn
D0
ADDR
DATA IN
BUSY
READY
OP
CODE
AI00880C
1. For the meanings of Xn and Dn, please see Table 5., Table 6. and Table 7..
17/38