M24C16-125 M24C08-125 M24C04-125 M24C02-125
Initial delivery state
4
Initial delivery state
The device is delivered with all bits in the memory array set to 1 (each byte contains FFh).
5
Maximum rating
Stressing the device outside the ratings listed in Table 4 may cause permanent damage to
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the operating sections of this specification, is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Table 4.
Symbol
Absolute maximum ratings
Parameter
Min.
Max.
Unit
Ambient operating temperature
Storage temperature
–40
–65
130
150
°C
°C
°C
mA
V
TSTG
TLEAD
IOL
Lead temperature during soldering
DC output current (SDA = 0)
Input or output range
see note (1)
-
5
VIO
–0.50
–0.50
-
6.5
VCC
Supply voltage
6.5
V
VESD
Electrostatic pulse (human body model)(2)
4000
V
1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly), the ST ECOPACK®
7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS)
2002/95/EU.
2. Positive and negative pulses applied on pin pairs, according to AEC-Q100-002 (compliant with JEDEC Std
JESD22-A114, C1=100 pF, R1=1500 Ω, R2=500 Ω).
Doc ID 022564 Rev 1
19/30
STMICROELECTRONICS [ ST ]
