欢迎访问ic37.com |
会员登录 免费注册
发布采购

LAN9313I 参数 Datasheet PDF下载

LAN9313I图片预览
型号: LAN9313I
PDF下载: 下载PDF文件 查看货源
内容描述: 三端口10/100管理型以太网交换机MII [Three Port 10/100 Managed Ethernet Switch with MII]
分类和应用: 以太网局域网(LAN)标准
文件页数/大小: 398 页 / 4083 K
品牌: SMSC [ SMSC CORPORATION ]
 浏览型号LAN9313I的Datasheet PDF文件第44页浏览型号LAN9313I的Datasheet PDF文件第45页浏览型号LAN9313I的Datasheet PDF文件第46页浏览型号LAN9313I的Datasheet PDF文件第47页浏览型号LAN9313I的Datasheet PDF文件第49页浏览型号LAN9313I的Datasheet PDF文件第50页浏览型号LAN9313I的Datasheet PDF文件第51页浏览型号LAN9313I的Datasheet PDF文件第52页  
Three Port 10/100 Managed Ethernet Switch with MII  
Datasheet  
Table 4.2 Soft-Strap Configuration Strap Definitions (continued)  
PIN / DEFAULT  
VALUE  
STRAP NAME  
DESCRIPTION  
autoneg_strap_2  
Port 2 Auto Negotiation Enable Strap: Configures the  
default value for the Auto-Negotiation (PHY_AN) enable bit  
in the PHY_BASIC_CTRL_2 register (See  
Section 13.2.2.1). When configured low, auto-negotiation is  
disabled. When configured high, auto-negotiation is  
enabled.  
AUTO_NEG_2  
This strap also affects the default value of the following bits:  
„ PHY_SPEED_SEL_LSB and PHY_DUPLEX bits of the  
Port x PHY Basic Control Register  
(PHY_BASIC_CONTROL_x)  
„ 10BASE-T Full Duplex (bit 6) and 10BASE-T Half Duplex  
(bit 5) bits of the Port x PHY Auto-Negotiation  
Advertisement Register (PHY_AN_ADV_x)  
„ MODE[2:0] bits of the Port x PHY Special Modes Register  
(PHY_SPECIAL_MODES_x)  
Refer to the respective register definition sections for  
additional information.  
speed_strap_2  
Port 2 Speed Select Strap: Configures the default value  
for the Speed Select LSB (PHY_SPEED_SEL_LSB) bit in  
the PHY_BASIC_CTRL_2 register (See Section 13.2.2.1).  
When configured low, 10 Mbps is selected. When  
configured high, 100 Mbps is selected.  
SPEED_2  
This strap also affects the default value of the following bits:  
„ PHY_SPEED_SEL_LSB bit of the Port x PHY Basic  
Control Register (PHY_BASIC_CONTROL_x)  
„ 10BASE-T Full Duplex (bit 6) and 10BASE-T Half Duplex  
(bit 5) bits of the Port x PHY Auto-Negotiation  
Advertisement Register (PHY_AN_ADV_x)  
„ MODE[2:0] bits of the Port x PHY Special Modes Register  
(PHY_SPECIAL_MODES_x)  
Refer to the respective register definition sections for  
additional information.  
duplex_strap_2  
Port 2 Duplex Select Strap: Configures the default value  
for the Duplex Mode (PHY_DUPLEX) bit in the  
PHY_BASIC_CTRL_2 register (See Section 13.2.2.1).  
When configured low, half-duplex is selected. When  
configured high, full-duplex is selected.  
DUPLEX_2  
This strap also affects the default value of the following bits:  
„ PHY_DUPLEX bit of the Port x PHY Basic Control  
Register (PHY_BASIC_CONTROL_x)  
„ 10BASE-T Full Duplex (bit 6) of the Port x PHY Auto-  
Negotiation Advertisement Register (PHY_AN_ADV_x)  
„ MODE[2:0] bits of the Port x PHY Special Modes Register  
(PHY_SPECIAL_MODES_x)  
Refer to the respective register definition sections for  
additional information.  
Revision 1.2 (04-08-08)  
SMSC LAN9313/LAN9313i  
DATA4S8HEET  
 复制成功!