欢迎访问ic37.com |
会员登录 免费注册
发布采购

LAN9210 参数 Datasheet PDF下载

LAN9210图片预览
型号: LAN9210
PDF下载: 下载PDF文件 查看货源
内容描述: 外形小巧单芯片以太网控制器与HP Auto-MDIX的 [Small Form Factor Single- Chip Ethernet Controller with HP Auto-MDIX]
分类和应用: 控制器以太网
文件页数/大小: 458 页 / 4618 K
品牌: SMSC [ SMSC CORPORATION ]
 浏览型号LAN9210的Datasheet PDF文件第235页浏览型号LAN9210的Datasheet PDF文件第236页浏览型号LAN9210的Datasheet PDF文件第237页浏览型号LAN9210的Datasheet PDF文件第238页浏览型号LAN9210的Datasheet PDF文件第240页浏览型号LAN9210的Datasheet PDF文件第241页浏览型号LAN9210的Datasheet PDF文件第242页浏览型号LAN9210的Datasheet PDF文件第243页  
High Performance Two Port 10/100 Managed Ethernet Switch with 32-Bit Non-PCI CPU Interface  
Datasheet  
14.2.6.7  
Switch Fabric MAC Address Low Register (SWITCH_MAC_ADDRL)  
Offset:  
1F4h  
Size:  
32 bits  
This register contains the lower 32-bits of the MAC address used by the switch for Pause frames. This  
register is used in conjunction with Switch Fabric MAC Address High Register  
(SWITCH_MAC_ADDRH). The contents of this register are optionally loaded from the EEPROM at  
power-on through the EEPROM Loader if a programmed EEPROM is detected. The least significant  
byte of this register (bits [7:0]) is loaded from address 01h of the EEPROM. The most significant byte  
(bits [31:24]) is loaded from address 04h of the EEPROM. These EEPROM values are also loaded  
into the Host MAC Address Low Register (HMAC_ADDRL). The Host can update the contents of this  
field after the initialization process has completed.  
Refer to Section 9.6, "Host MAC Address," on page 119 for details on how the EEPROM Loader loads  
this register. Refer to Section 10.2.4, "EEPROM Loader," on page 149 for information on using the  
EEPROM Loader.  
BITS  
DESCRIPTION  
TYPE  
DEFAULT  
31:0  
Physical Address[31:0]  
This field contains the lower 32-bits (31:0) of the physical address of the  
Switch Fabric MACs.  
R/W  
FF0F8000h  
SMSC LAN9312  
239  
Revision 1.2 (04-08-08)  
DATASHEET  
 复制成功!