NAME
Delay 2 Time Set
Register
REG INDEX
0xB8 R/W
DEFINITION
STATE
This register is used to set Delay 2 (for Soft Power
Management) to a value from 500 msec to 32 sec.
The default value is 500msec. Engineering Note:
this delay is started if OFF_EN is enabled and
OFF_DLY was set and a Button Input comes in.
C
Default = 0x00
on VTR POR
Bits[5:0] The value of these bits correspond to the
delay time as follows:
000000= 500msec min to 510msec max
000001= 1sec min to 1.01sec max
000010= 1.5sec min to 1.51sec max
000011= 2sec min to 2.01sec max
...
111111 = 32sec min to 32.01sec max
Bits[7:6] Reserved
197