欢迎访问ic37.com |
会员登录 免费注册
发布采购

SI1002-C-GM 参数 Datasheet PDF下载

SI1002-C-GM图片预览
型号: SI1002-C-GM
PDF下载: 下载PDF文件 查看货源
内容描述: 超低功耗, 64/32 KB , 10位ADC, MCU ,集成了240-960兆赫的EZRadioPRO收发器 [Ultra Low Power, 64/32 kB, 10-Bit ADC MCU with Integrated 240-960 MHz EZRadioPRO Transceiver]
分类和应用:
文件页数/大小: 376 页 / 2369 K
品牌: SILICON [ SILICON ]
 浏览型号SI1002-C-GM的Datasheet PDF文件第345页浏览型号SI1002-C-GM的Datasheet PDF文件第346页浏览型号SI1002-C-GM的Datasheet PDF文件第347页浏览型号SI1002-C-GM的Datasheet PDF文件第348页浏览型号SI1002-C-GM的Datasheet PDF文件第350页浏览型号SI1002-C-GM的Datasheet PDF文件第351页浏览型号SI1002-C-GM的Datasheet PDF文件第352页浏览型号SI1002-C-GM的Datasheet PDF文件第353页  
Si1000/1/2/3/4/5  
SFR Definition 27.13. TMR3CN: Timer 3 Control  
Bit  
7
TF3H  
R/W  
0
6
TF3L  
R/W  
0
5
TF3LEN  
R/W  
0
4
3
2
1
0
Name  
Type  
Reset  
TF3CEN T3SPLIT  
TR3  
R/W  
0
T3XCLK[1:0]  
R/W  
R/W  
0
R/W  
0
0
0
SFR Page = 0x0; SFR Address = 0x91  
Bit  
Name  
Function  
7
TF3H  
Timer 3 High Byte Overflow Flag.  
Set by hardware when the Timer 3 high byte overflows from 0xFF to 0x00. In 16 bit  
mode, this will occur when Timer 3 overflows from 0xFFFF to 0x0000. When the  
Timer 3 interrupt is enabled, setting this bit causes the CPU to vector to the Timer 3  
interrupt service routine. This bit is not automatically cleared by hardware.  
6
5
TF3L  
Timer 3 Low Byte Overflow Flag.  
Set by hardware when the Timer 3 low byte overflows from 0xFF to 0x00. TF3L will  
be set when the low byte overflows regardless of the Timer 3 mode. This bit is not  
automatically cleared by hardware.  
TF3LEN  
Timer 3 Low Byte Interrupt Enable.  
When set to 1, this bit enables Timer 3 Low Byte interrupts. If Timer 3 interrupts are  
also enabled, an interrupt will be generated when the low byte of Timer 3 overflows.  
4
3
TF3CEN  
T3SPLIT  
Timer 3 Comparator 1/External Oscillator Capture Enable.  
When set to 1, this bit enables Timer 3 Capture Mode.  
Timer 3 Split Mode Enable.  
When this bit is set, Timer 3 operates as two 8-bit timers with auto-reload.  
0: Timer 3 operates in 16-bit auto-reload mode.  
1: Timer 3 operates as two 8-bit auto-reload timers.  
2
TR3  
Timer 3 Run Control.  
Timer 3 is enabled by setting this bit to 1. In 8-bit mode, this bit enables/disables  
TMR3H only; TMR3L is always enabled in split mode.  
1:0 T3XCLK[1:0] Timer 3 External Clock Select.  
This bit selects the “external” and “capture trigger” clock sources for Timer 3. If  
Timer 3 is in 8-bit mode, this bit selects the “external” clock source for both timer  
bytes. Timer 3 Clock Select bits (T3MH and T3ML in register CKCON) may still be  
used to select between the “external” clock and the system clock for either timer.  
Note: External clock sources are synchronized with the system clock.  
00: External Clock is SYSCLK /12. Capture trigger is Comparator 1.  
01: External Clock is External Oscillator/8. Capture trigger is Comparator 1.  
10: External Clock is SYSCLK/12. Capture trigger is External Oscillator/8.  
11: External Clock is Comparator 1. Capture trigger is External Oscillator/8.  
Rev. 1.0  
349