LC75852E, 75852W
• Description
When determining key on/off and reading key data, the controller must confirm the state of DO output when CE is
low. When DO is low, the controller recognizes that a key has been pressed and reads the key data. After the time
t8, the next key on/off determination and reading key data must be confirmed by the state of DO output when CE is
low. During this operation t8 must obey the following condition:
t8 > t4
If key data is read when DO is high, the key data (KD1 to KD30) and the sleep acknowledge data (SA) will be
invalid.
■ No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace
equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of
which may directly or indirectly cause injury, death or property loss.
■ Anyone purchasing any products described or contained herein for an above-mentioned use shall:
➀ Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and
distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all
damages, cost and expenses associated with such use:
➁ Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on
SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees
jointly or severally.
■ Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for
volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied
regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of November, 1997. Specifications and information herein are subject to
change without notice.
No. 4828-16/16
SANYO [ SANYO SEMICON DEVICE ]
