R8C/13 Group
14.2 Repeat mode
14.2 Repeat Mode
In repeat mode, the input voltage on one selected pin is A/D converted repeatedly. Table 14.3 lists the
specifications of repeat mode. Figure 14.5 shows the ADCON0 and ADCON1 registers in repeat
mode.
Table 14.3 Repeat Mode Specifications
Item
Specification
Input voltage on one pin selected by CH2 to CH0 and ADGSEL0 bits is A/D
converted repeatedly
Function
Start condition
Stop condition
Set ADST bit to “1”
Set ADST bit to “0”
Interrupt request generation timing None generated
Input pin
One of AN0 to AN11, as selected
Read AD register
Reading of result of A/D converter
Rev.1.20 Jan 27, 2006 page 130 of 205
REJ09B0111-0120