RESET
3.2 Pin state
3.2 Pin state
Table 3.2.1 lists the microcomputer’s pin state while the voltage level at pin RESET is “L.”
Table 3.2.1 Pin state while voltage level at pin RESET is “L”
Pin MD0’s level
Pin (Bus, Port) name
P1, P2, P5–P7
Pin state
Floating.
Pin MD1’s level
Vss
Vss
MASK ROM version,
Flash memory version
(Note 1)
Vss
Vcc
Vcc
P1, P2, P5–P7
P1, P2, P5–P7
Flash memory version
(Note 1)
Floating.
Floating (Note 2).
Notes 1: Refer to “CHAPTER 19. FLASH MEMORY VERSION.”
2: Pins P56, P57 and P60 to P65 output “H” or “L” level when “H” level of voltage is applied to pin VCONT and “L” level to pins
P70, P71.
7906 Group User’s Manual Rev.2.0
3-5