PE43704
Product Specification
Figure 35. Tape and Reel Drawing
Tape Feed Direction
Notes: 1. 10 sprocket hole pitch cumulative tolerance ±.02
2. Camber not to exceed 1 mm in 100 mm
3. Material: PS + C
Ao = 5.25 mm
Bo = 5.25 mm
Ko = 1.1 mm
Pin 1
4. Ao and Bo measured as indicated
Top of
Device
5. Ko measured from a plane on the inside bottom of the pocket to the
top surface of the carrier
6. Pocket position relative to sprocket hole measured as true position
of pocket, not pocket hole
Device Orientation in Tape
Table 14. Ordering Information
Order Code
PE43704MLCA-Z
EK43704-11
Description
Package
32-lead 5x5 mm QFN
Evaluation kit
Shipping Method
PE43704 Digital step attenuator
PE43704 Evaluation kit
3000 units / T&R
1 / Box
Sales Contact and Information
For sales and contact information please visit www.psemi.com.
Advance Information: The product is in a formative or design stage. The datasheet contains design target No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party.
specifications for product development. Specifications and features may change in any manner without notice. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant,
or in other applications intended to support or sustain life, or in any application in which the failure of the
Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no
liability for damages, including consequential or incidental damages, arising out of the use of its products in
such applications.
The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and DuNE
are trademarks of Peregrine Semiconductor Corp. Peregrine products are protected under one or more of
the following U.S. Patents: http://patents.psemi.com.
Preliminary Specification: The datasheet contains preliminary data. Additional data may be added at a later
date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best
possible product. Product Specification: The datasheet contains final data. In the event Peregrine decides to
change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer
Notification Form).
The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use
of this information. Use shall be entirely at the user’s own risk.
©2012-2013 Peregrine Semiconductor Corp. All rights reserved.
Document No. DOC-16514-6 |
UltraCMOS® RFIC Solutions
Page 20 of 20
Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com
PSEMI [ Peregrine Semiconductor ]
